Tip Enclosure

There are electronic shops selling soldering irons, but there was no protective cover for this iron product. This time we have decided to purchase the tip and protective cover at a different store, but I would like to purchase together in the future. As you can see, it is impossible to separate the protective cover from the tip of the old part with the old part when replacing, I think that there is also a selling method to purchase together.

It is very useful for white light products because there are few sales of consumables.

When exchanging the soldering tip it is necessary to replace the protective pipe Item to be sold with soldering iron tip

Failure of the soldering iron is nearly 100% seizing of the replacement bit and protective pipe. I bought a new soldering iron because it can not be exchanged here because of bits or burning up here, but if you change the protection pipe you will be able to exchange bits again so it will be cheaper than the new one. This is good.

I fixed it so I bought it for replacement. It can be used normally.

PRESTO (straight type) (protective pipe) does not enter. We also purchase soldering tips.

This is the first time that the replacement part pipe and the soldering iron stuck together, I think that as a countermeasure from now on I would like to loosen the nut and detach it for maintenance. It seems that the tip of the pipe will soon become dirty when it is inserted in the cleaning wire.

Since the protective pipe does not wear out unlike the iron tip, it is dissatisfactory that it should be devised so as not to be unlocked when replacing the tip. I feel like I got back to the new item when I replaced it at the same time · · ·

Since only pipes are not exchanged, it is cheap and it will be saved if you sell it as a set. I ordered the size of this front pipe different.

There are too many parts at replacement