The reviews are automatic translation.
On 2017-10-12 15:52:30
Since it is an auto head type, it is good to be able to use without consciousness of Buddhist expression or rice formula. I thought that high pressure tires can be filled with air relatively easily.
For bicycle maintenance
On 2017-01-23 17:31:45
As expected it is made by Panasonic, high pressure, so we chose a reliable manufacturer what performance is not to say
On 2016-11-28 22:15:51
The tire of the newly purchased bicycle was a high pressure use of 400 kpa · · I bought this with the traditional foot type air inflator broke (it seems that the tube or hand was damaged due to high pressure) · Pampan · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · Can you use it for cars? I thought but · · painful
As a faucet air vent
On 2016-08-22 09:28:57
Although I bought it with a visual emphasis, I felt the rigidity of the place where I reached handly and used it immediately. Despite the desire, I was satisfied if the amount of air of one stroke was a little more. Moreover, the footstool that steps on foot? It is still better if it is three centimeters wider.
On 2016-04-16 10:08:54
It seems that the gauge is also working normally for 3 years after purchase. I am satisfied with ease of use. Although it may be used by attaching it for dragonfly adapter for British valve (order code: 37601873), it can be used without problems. Although it can not use gauges, there is no way to do it due to the structure of the English valve.
Adjustment of air pressure of cross bike.
On 2015-08-16 20:14:13
It is a French valve, but it can be used without problems. If the price was a little cheaper it was the best ... The design was more pretty than I thought, it was quite good! It is recommended especially for women.
On 2015-06-29 15:20:04
When placing air, there is a noise that leaks from the bottom of the ground pump. Even if the air injection port is actually closed completely, the pump lever easily moves up and down. However, although the air enters the tire. Is this normal? I can not judge whether it is a defective item.
Put air in a Buddhist valve
On 2015-04-25 02:37:01
I hold the mouth firmly and easy to see the gauge.
For replenishment of automobile air
On 2014-01-29 11:54:55
I bought it for air replenishment of the car. Previously used was a pump that was shared with the bicycle, but air leaked from the head, hose was also short and hard problems before putting in air There are many problems before adding air, I used it only occasionally so I bought the product with design and price. As a result of using it quickly, the hose is also long and suitable hardness, so it is easy to draw around, and also easy to install and remove the auto head, especially when removing after filling with air I think that it is very easy to use. The positioning of the mark indicating the filling position of the gauge should be slightly harder. (It moves immediately when you touch) But I use the gauge of the pump as a guide, fine adjustment is done by the tire gauge. I am satisfied that I bought a good one.
Road bike inflator
On 2013-11-10 17:17:34
It was not so heavy and high pressure filling of road bike tires was possible without pumping too much. I think that it is lightweight made from aluminum but does not feel cheesy. However, even when putting in the prescribed air pressure while checking with the gauge, a considerable amount of air escapes when removing the head. In anticipation of it, it is necessary to devise measures to make it somewhat higher.