The reviews are automatic translation.
On 2016-10-19 10:28:12
It was replaced because the other day 20,000 to km over, the WR of the set, but grams has changed and those 6.5 grams were purchased at the same time because it is not displayed, is not seen significant changes for now.
(Acceleration kana became a little better?)
Maintenance of the jog 3kj
On 2016-09-29 18:16:02
Purchased in order to be attached to the 50cc bike, but I hit the manufacturer of the part number, we arrived products but nice outline 21Φ boss want to see for the 90cc did not run in the weight of 8g also weight unusable large inner diameter.
It was attached to the address V100
On 2016-06-28 16:57:00
It arrives in the assembled state.
Was seen to confirm the contents once decomposed to, there was a slight burr to WL.
Could such an extent that can take in while you are using, but it was assembled from to clean so anxious. Grease was not painted in.
Durability does not know yet, but ran itself will feel closer to the initial value.
Maintenance of address V100
On 2016-06-19 11:32:01
Weight roller is sent is set has been received while the moss was in. To try to remove the back of the lid in order to return the roller but are tight enough to lick bis. Have trouble in the metal fittings that suppress the case back also remove somehow the screws to remove hearing an O-ring. Not only remove at prepared to become deformed. Make the weight roller also Zatsui.
Cheap is good
On 2016-03-30 12:23:52
Because the length of the boss is different, we have used as the old one.
Weight roller was replaced with their own preferences.
Cheap and survive.
On 2015-12-21 16:20:51
The weight of the weight roller also want to display.
I also think that there is the same opinion in addition.
I wonder if there is a reason you do not want to see?
On 2015-11-15 05:01:35
It's no problem, I do not fall even roller, the movement of the moving parts of the slide piece was attached at the OK normally non-processed in the grease without polishing so get familiar When I was traveling in a degree a little bad, running is also a sense of discomfort no runs strong.
On 2015-04-03 04:13:17
While you are running to several times the axial direction by hand, the roller parts is no longer able to adjust the width between the pulleys will rotate.
It was from the shaft hole to move and remove the roller parts.
On 2015-02-22 13:25:08
I bought the repair of Vino 5AU.
Lamp plate or spline of accuracy is bad, it did not enter if not it about hitting a little. So scary I used genuine.
Weight roller is too light? I do not know well because it does not aim to there is no notation what grams of the
Boss is longer thin compared with the genuine. Shaved and was used.
Other than the lamp plate and WR is especially without a complaint.
Used for processing
On 2015-02-14 14:15:07
Well without any movement of the slide piece is cool.