The reviews are automatic translation.
On 2018-02-15 01:48:40
We are saving a little more to pursue variations in accuracy and smooth discharge of cutting powder.
On 2017-12-04 16:46:57
I use this set of the Holesaw with an electric tool of 18V, but it is very solid and does not spill such blade so much and lasts long. I think that I will patronize this set from now on.
Connection work of PVC pipe
On 2017-11-18 16:48:38
The center pin is common, only part of teeth can be exchanged.
Even if you have them in different sizes you can store them in layers
I will not take up space inside the tool box.
Drilling of ventilation holes etc
On 2017-08-07 19:59:19
There are various kinds of sizes, it is very easy to drill holes for switches, outlets etc attached to ventilation holes and wooden board etc.
Stainless steel drilling
On 2017-08-05 17:48:35
The price is high but sharpness and cut is top level.
Do not forget to use drilling oil and use it.
Drilling work on resin
On 2017-07-07 18:09:40
If you prepare one set of Arbor you can purchase only the cutter section, it can be saved because you can align multiple cutter diameters at low price. For other diameters SS400 processing was also done, but sharpness is no problem.
Drilling work of pipe
On 2017-05-14 18:55:37
I bought 48 mm, but one teeth (mountain) was missing, it is not a broken one, it is a thing from the beginning, you will understand.
Electrical work, drilling down lights
On 2017-04-06 15:02:12
I feel better than I thought. Place of use, wood ceiling board, gypsum board.
Docomo antenna construction
On 2016-07-27 16:28:06
After scraping the board, it is difficult to pick up the scum inside the Holsau, so I'd like to devise a little more in the sideways hole of Holso (another Holzo is also ...)
Simple trap mounting for washing
On 2016-07-06 11:46:20
Makita's 760 W vibration drill (drill mode) corrected the drain hole of the 5-minute floor of Tamo. When making jig with cedar board 30 mm, chips did not come out and put in and out. Using jigs cut about half of the circumference, it finished without difficulty. The quick arbor is easy to remove the blade without removing the shaft from the drill and push out the wood left in the blade when making the jig. I think that it is worth buying this just by troubleshooting by pulling screws.