The reviews are automatic translation.
Removing the lower arm ball joint
On 2017-04-08 10:01:26
If it is a tie rod end there is no problem but it broke with the removal of the lower arm. It is suitable for the price ...
Removal of lower arm joint and tie rod end
On 2017-04-06 23:17:59
Although it will be deflected when you close it, there was nothing to break (first use). However, because the size is large and the nail is also thick, there is a slight difficulty in workability when using it for a light car, as the hook of the nail becomes shallow or not hung. Cars with narrow surrounding space are cautious.
When removing the tie rod end joint etc.
On 2017-04-01 09:42:58
If you do not put it in the joint part all the way down, the tip of the bolt will be slightly crushed due to the curve of the lower jaw in the photograph, so be careful. I think that it was for escape prevention, but I think that it was good even a little more straight. But if you knock it tightly into the back you will have little problem, of course you will continue to use it.
On 2017-01-31 14:56:54
Although I used it several times, there is no problem. I'm just glad that the nails are a bit deeper.
Tie rod end removed
On 2016-12-30 20:48:02
I got out of parking without difficulty. It is an amateur 's DIY, so it' s definitely a lifetime thing.
Maintenance of automobiles
On 2016-10-11 21:37:26
I used the cheap one from other companies, the tip was broken during use. Although my heart broke for a while, I tried again with this item and the work was successfully completed.
Detaching the lower arm joint
On 2016-08-07 17:09:46
I broke up on the second use · · ·
Removal of tie rod etc
On 2016-07-28 20:37:09
Materials may be good, but product making precision is bad. It was not a satisfactory product.
When exchanging tie rod end boots
On 2016-05-28 19:41:32
It can be used in the same way as other companies' products.
Tie rod end split
On 2015-11-28 00:20:50
It was stickier than a bad product, and the aged items that had to be tightened considerably tightened out. I tried to tighten the box so much as to think that the fulcrum or claw would break, but it was especially unscathed even after it got dislocated.