The reviews are automatic translation.
For equipment maintenance
On 2017-09-25 18:38:55
It is inexpensive but sufficient quality for our purpose of use. I do not know the difference with NB articles.
I will continue to use it.
On 2017-04-15 08:03:19
When buying this at the home center, it costs a great saving as it costs as much as 50 yen
Prevention of detachment of nut
On 2017-03-20 12:32:17
It seems they have pulled out. I stopped moving on bolt fastening. I will not return. Would you cut it with a grinder? Sorry.
Used for mounting bolt of parts
On 2016-12-26 16:47:02
There are complaints that parts are dislocated due to vibration, and it was hastily adopted. I expect that nut detachment will disappear.
Boat jet ski trailer relationship
On 2016-11-23 17:31:45
There is a defective item at a reasonable price because the price is cheap If you tighten it will harden on the way and trying to loosen it will not scrape off the threads and you will be disconnected with a grinder etc.
Fixing angle of post
On 2016-10-09 06:10:04
I am concerned about looseness by vibration, I have used it before. The product got even better.
I am using it for maintenance of a motorcycle.
On 2016-07-23 11:33:43
Because it is made of stainless steel, it is used for the lower part of the car body because it is not rusted and has a loose stopper. Because it is cheap, it is very useful.
When making mechanical objects
On 2016-01-29 12:48:19
it is normal. No problem.
On 2016-01-28 23:32:14
The quality is not stable. Nuts with poor quality are mixed. Some things are not cut straight, some stainless steel parts for fixing the nylon may interfere with the bolt and it will not be detached from the bolt to damage the screw thread on the bolt side, or the screw thread of the bolt is perfect It collapses to. I used it for a special bolt this time but unfortunately I put a bad nut and I had to replace the bolt. I am in trouble because I can not get it only for special bolts. I thought that it would be cheap, but since there are also cheap and bad nuts, I think that it is good for the part where you can exchange any number of bolts on the other side.
On 2015-06-30 15:22:35
I replaced it with an iron nut at the time of assembling a part which can reach only when disassembling and maintenance and used it. It was convenient to prevent sticking due to rust.