The reviews are automatic translation.
On 2016-08-25 22:06:06
Still, it seems you do not use can be used normally.
BB removal of MTB
On 2016-08-22 11:51:40
Was difficult by hand tools have stuck because it was an old MTB, but can be removed using the impact wrench.
On 2016-05-23 21:51:06
Because it is less frequently used tool, should I Bonus points for reasonably cheap.
Cheaper than brand-name products, so there was no problem to work, it meets the request.
On 2016-05-23 18:11:19
There are fixed to the vehicle, but was a state that is not loosened by hand tools, air impact use, we were able to loosen a low torque by rotating while pressing
Removal of the cartridge BB
On 2016-04-21 18:17:53
In firm made to the split of the price,
It could be used without any problem.
On 2015-11-02 17:33:43
For also perform automotive maintenance, have a spinner handle of 12.7 square
So I bought the people of 052,302.
When I actually used, somewhat sweet engagement of this tool and Shimano BB,
The axial length of the engaged portion 3-5 mm (BB model and the left and right in different
In made), because the screws are tight, not holding firmly
If, this tool is missing from BB immediately.
To say whether, it is unclear whether mate perfect if Shimano.
Rather than a tool of the problem, on the structure of the BB, because engagement is small.
Use the hole of Fiki single bolt that secures the crank, this tool
But I think trying to loosely secure with the strain so as not to long bolt, bolt
But seems to be about 8 mm, the pitch does not fit in the coarse of the screw.
I think whether M8 or 5/16 inch of fine thread.
Replacement work was completed, but the tool was that difficult to use.
- Selection of 052,302 and 02,189]
Hexagonal portion of 052 302 is a 24 millimeter, which is also not used rarely
It will be the wrench size. Exchange of sprocket be considered, 24 mm
As it has a deep socket, the long bolt (40 mm
If the degree) can get, I think it is better of 052,302.
Person of 02,189 will need 32 mm wrench, the handle also in wide Monkey
Because not long need a force, because the screws are tight, also considered the extension of the handle
There must, it takes a big load on the monkey.
Speaking of The choice as also new purchases socket, to 02,189 the center
Here assuming that there is 8 mm or more holes are open, the removed Fixing
Used as a stop missing a bolt, it is better to buy a 32 mm socket
I think that any good.
※ MonotaRO's, you should be published photograph that can confirm whether the hole is free.
It is purchased the 32-socket of this tool and the TRUSCO, than buy a Shimano
It will be cheaper.
※ both socket handle is the assumption is that you are owned.
To remove the bicycle of BB
On 2015-10-06 15:50:58
Price is also cheap, quality is no problem.
BB maintenance of cross bike
On 2015-07-10 15:44:51
BB removed, with respect to attachment, if you do not care because there is a height, deviates from the target, but there is a lick possibility, I will not be in such a thing, it could be used without problems.
A low a little more height, I think that what kind of worry is reduced.
Maintenance of bicycle
On 2015-03-31 15:39:36
Cheap and is satisfied. It is not intended frequently use You saved so cheap.
Bottom bracket Remove
On 2015-03-20 00:22:23
Therefore buy BB of the bicycle was riding was ISIS drive.
It is a helluva cheap compared to others, but it was completely okay.