The reviews are automatic translation.
Prevention of messing around with stupid
On 2017-08-22 16:07:57
Although it was replaced with a normal switch with considerable thickness
Installation location interferes with opening and closing of the door near the door and can not be installed
Used for switches of outdoor light with brightness sensor
On 2017-04-11 12:34:19
I erroneously erase it, I will not turn on at night, so I thought it was good to start from the beginning. However, I think whether it may be slightly thinner.
On 2016-02-26 23:06:46
Purchase some pieces on the cover of the timer after opening Panasonic. I used it somewhat devised so as not to accidentally touch the timer, and to make it easy to use. To make it easy to turn on / off the timer at the moment of opening, use a hole that allows you to insert a finger or insert an outlet. I wanted a round corner, but I could not find it so I bought a horn.
Prevent erroneous operation of the smoke exhaust switch
On 2015-11-09 14:02:18
It is light and easy to come off, but because there was no substitute item, it was saved by being cheaply arranged. Actually I wanted to paint the white part of the frame red, but abandoning it because it seems that it will crack when I remove the plastic cover.
Garage outlet cover
On 2015-09-10 16:20:24
I think that it is good as a product. I think that it is good if there is a thing with a slightly more waterproof function with this item.
Light switch cover for mistake prevention
On 2015-08-14 09:41:16
In the state that the cover is opened, when the hand touches the cover from the side, it will easily come off from the plate. Since it is just snapped into the plate of the base from the front, it is necessary to be careful when opening it.
To the sensor light
On 2015-07-04 19:24:16
Toilet, stairway etc. We installed on the wall switch of the part replaced with light with sensor. Although I pressed the switch erroneously despite turning it on and off with a sensor, it was resolved that the sensor was switched ON and OFF again within a certain period of time and the sensor was switched to manual and it was troublesome. Will not it be good for shops because it will not be pushed the switch even when visiting?
Switch misoperation prevention
On 2013-09-27 08:25:46
It is easy just to remove and fit if you do not have to swap the switch up and down. It's fine to have a flat surface, but it's fine