The reviews are automatic translation.
On 2018-01-25 14:08:55
PG, because the hole of the wood screw that stops the back panel has become crawlered,
I embedded this product.
M3 's Deguchi nut is not very easy to sell, so it is very helpful.
Thanks somewhat loose tight PG fit perfectly to the body
It was a beautiful finish.
On 2017-10-12 10:10:17
M3 is not in the nearest home center. As for the part that repeats opening and closing, bolt nut is more reliable than wood screw only.
On 2017-07-31 20:16:42
It is a product as expected and there is no particular improvement request. With outdoor use,
I am concerned about the rust preventive side.
As female thread of wood product
On 2017-05-21 23:48:03
I use it for a small wooden toy. Very easy to use and the design expanded.
Used for wood work
On 2017-01-27 15:03:24
There is no handling of M3 size ogre nuts at home centers, etc. It is the quickest to obtain by mail order such as Monotaro san. Products are hammering with a hammer or the like, but if the object to be machined is a soft material, there may be cases where press-fitting can be performed with a press machine, clamp or the like after pilot hole processing.
Used for woodworking products
On 2016-10-05 22:10:15
It is reasonable, but satisfactory for general use.
On 2016-02-11 05:42:37
Since 3mm has few stocks in stock, it is only available in monotalou and others in terms of only mail order. Because it is a driving type, I am concerned about the cracking of a tree, but it cracks with 9.3 mm thick MDF at 4.3 dust. We made φ4.5 drill depth 10 and introduction φ5 drill depth 2, and put epoxy slightly on the tip and inserted 2 mm deep, it was possible to use it with high strength.
On 2015-08-24 00:47:16
Since 3mm has few stocks in stock, it is only available in monotalou and others in terms of only mail order. Although it is worrisome for cracking of trees because it is a hammering type, 9 mm thick MDF somewhat cracks left and right but it can be driven somehow.
On 2015-04-21 21:11:10
Eclamation is very good.
Frame of rear plate
On 2015-02-15 17:03:01
Because this size of ogre nut can not be obtained at home center, it is saved.