The reviews are automatic translation.
Used as an embedded nut for wooden products
On 2017-05-21 07:12:00
Attention is required for the diameter of the pilot hole because the outer shape is tapered.
DIY TV stand production
On 2017-03-20 22:09:00
Because there is no television stand of the right size, it is made at DIY. Assemble using demon nut and joint connector bolt. I was very happy that I could insert it firmly into the wood with a hexagon. It is convenient that you can accurately check dimensions etc on the net.
To consolidate timber
On 2016-04-11 15:24:58
If it is a hard tree you need a 6 mm hole in the M4. When screwing in forcefully, the screw hole on the bolt side is easily damaged. If kitty and pilings are open, it will be easy to enter. E type is easy to use because there is a taper, but I hope there are some more variations of the material
On 2015-08-06 16:24:36
I made a wooden chopstick, I stayed better than a wooden screw.
On 2015-02-06 09:30:10
When you want to embed a nut in a tree, it is convenient because it can be inserted easily.
For installation of equipment
On 2014-10-30 16:14:37
I sold 6 × 30 to HC, but it was saved without 6 × 13. Easy to open if the strength of the hexagonal wrench hole is low and the hole diameter is small. I also want stainless steel.
For installing woodworking machine fixedwood
On 2014-05-26 14:03:23
I have to set it while adjusting it so that it goes straight in, but the screw-in type is easy to use with a firm number of packages with strength and strength, but also want packs with quantity when using in large quantities. In addition, it is easy to use when you post the pilot hole diameter in the pack.
Universal shelf stop
On 2013-10-17 15:34:29
There is price merit, but it is still better if price becomes cheaper a little more. The strength of the tightening mouth of the hexagonal wrench feels somewhat weak.