The reviews are automatic translation.
As a material of leather craft
On 2017-09-06 20:11:15
It is better than what is sold as a material of leather craft and it has a screw thread on both sides so it is good to detach it even if it is fixed with screw lock (loosening stop).
Repair of helmet
On 2016-08-25 17:00:29
Used as a substitute for rivets. It can be used without discomfort.
For waterproof saddlebag remodeling
On 2016-05-15 14:54:19
I wanted a 4 mm type, but if it had a shorter length, it was "female side / (+) (-) none" or "penetrating", so I adjusted it by myself. I wish for the expansion of the shorter size of the type that has (+) (-) on both sides. As for the plus shape, one side is longer so that it can be turned with a flathead screwdriver. Although it is a sense of size just like turning with a coin driver, in fact the recessed portion of the minus portion is dented at the center while the depth is almost gone at the outer circumference, and unless it coincides with the R on the driver side, a medium torque is applied not. Therefore, if the minus indentation is straightened from the center to the outer periphery, it will be more easily torquable.
As a shaft of a suitcase caster
On 2015-09-18 21:49:50
Was the reading of the drawing bad? I thought that the length of l (small ell) plus 5 mm was the length. For example, when buying 5 × 25 items, I thought that the length of the shaft between the head and the head would be 30 mm, but things of 25 mm will be sent. Do not make the same mistake as me. Just in case.
Clothes part stop
On 2015-02-11 14:23:15
I use it to make it possible to remove parts of costume. I used things for filing documents so far, but since it is so easy to dismiss it, I'm going to change it here. It is good because it is hardened.
We are summarizing the documents.
On 2014-08-12 14:28:30
I think that it is solid and very good product, but unfortunately it is expensive.
For coin concho creation
On 2014-03-27 09:46:40
It is easier to handle if the hardness is a little harder but it can be used without problems if treated politely.
Leather work, used to fasten the smart key. Another one is used to keep the keys of the house, the locker etc.
On 2013-10-11 17:21:58
Although it was a dimension, it was intended to use a spacer attached to 5.0 mm of outer shape, but there is a macule on the tip side (dimension is 5.05 mm) Spacer does not enter. I dropped 0.05 mm with an oil grinding stone, but scratches arrived at the shaft again. I think whether it can not be helped if it goes pricewise. Because it is rough as to the axis about fastening the house and the locker key, it can be used as it is, so we are very satisfied with the use by those of us.
As a decorative fastener on the surface
On 2013-04-24 13:23:39
Since there is only one kind of screw diameter, I want you to prepare the kind of M6 to M6.
Travel Bag Caster Wheel Replacement Repair
On 2013-03-20 18:04:44
At first I was not able to find a suitable one on the axle, I was considering a combination of a spacer and two screws, but there was not another one fitting to the size. Because it is a caster, I think that it is advantageous because there is only one screw against the danger of the screw being loosened by vibrating. It is even better if the nut is less likely to come off like a U-nut ....