The reviews are automatic translation.
Installation of car radio
On 2017-07-07 14:46:40
I used it for wiring when installing the radio in a car. Because it will be used for wires that run near 20 A, it will not be a problem with 5 A class items that you can buy at a home center.
It was saved because I could purchase it cheaply.
On 2017-07-04 11:20:08
I am happy to purchase at this price, and I plan to purchase additional items.
Fuse of vehicle equipment
On 2017-06-26 12:57:37
The lowest product, braid fusing hardness is not steady.
Saying it is not inserted ... ... If you brute force it breaks the blade fuse.
Without any help, spread the terminal inside with a thin screwdriver and fuse it again.
It will not come out if it is inserted, but what is it like as a product? Is it? Is it?
On 2017-05-23 19:11:56
There is no clearance between the fuse and the holder, and it is very solid when fitted, but when considering things when blowing out, the insertion and removal is hard and uneasy. However, if it is loosely inserted so that it can be easily pulled out, there is concern about contact resistance, so when using it for an automobile or the like, I felt it was necessary to carry a tool to remove a fuse. In recent years, most of the vehicles with low back fuses are used, so I think that it is not possible to use in-vehicle fuse detachment tools.
Power supply fuse
On 2017-05-04 23:21:38
As you can see in the review, when inserting a fuse it is hard but it is not a problem that it is not frequently cut off.
Used to supply 12V battery
On 2017-03-13 20:09:32
It is cheap but firm. There is also a review that it is hard and dissatisfied, but rather there is no need to worry about falling off due to vibration or the like.
To create a camper
On 2017-01-18 16:45:36
It is good for cost reduction because we use a large number of items We are always asking for 20 pieces
Car maintenance DIY
On 2016-11-14 23:44:51
The price is cheap and it always helps
Old car headlight
On 2016-11-07 17:13:40
The internal copper terminal itself seems to have a spring function, but there is no space with the resin parts covering it, so once you insert it it can not come out with bare hands. I doubt whether I did the inspection of inserting / removing even once in the development stage. First complaint · · ·.
Connected to the middle of the bike's battery from positive wiring to vehicle side wiring.
On 2016-10-13 20:46:50
Making is firm regardless of the amount, it is not less than a commercially available manufacturer's item. I bought it thought that it was more complicated but betrayed my expectation in a good way.