The reviews are automatic translation.
Instead of the CBR 250 RR flywheel puller
On 2018-02-05 22:35:39
Since it is pitch 1.5 of M20, it was able to be used as a special tool. Although the genuine tool will be about 5000 yen, in this case it is about 600 yen. It can be used without problems.
Repair of air composite jack
On 2018-01-26 21:57:06
Even if I looked for a screw shop in my neighborhood, I found that the bolt of this size was ordered and eventually it was ordered with usual one click. It was a blessing that it was regrettable if it was one unit.
Used for maintenance of frame corrector
On 2018-01-20 14:36:31
I ordered a small amount because it became necessary quickly. The detailed bolt was saved because it is not sold at home center even by size.
Remove motorcycle's flywheel
On 2018-01-05 10:56:41
Because it is not used frequently, I found it where I was looking for bolts that are cheaper than the special tool and I was looking for it. It is satisfactory to use without problems.
Maintenance of the motorcycle
On 2017-12-13 16:50:21
Although I was using other people, but I used it to pull the big single flywheel to the front I bought a maker tool and it is 15000 yen It arrived in a short time and it was saved
Flywheel removing operation of large motorcycle
On 2017-11-15 15:48:37
The goods were things of cromoli steel. The end face was machined flat with a lathe and it was used. We were able to substitute inexpensively special tools which are generally difficult to obtain.
With the bolt of the SS material, the bolt screw was broken, but with this product it was able to remove the flywheel safely without such a thing.
On 2017-10-11 00:07:02
I used it to fix diversion calipers of other cars
There was also strength, it was safe to use it
Bike - rear up hook
On 2017-08-31 11:59:03
I used it as a hook for bike - rearup, this time I purchase that repeat.
The previous one failed at the time of insertion, it got out of position and got out, slowly removed with a torque exceeding 10.0 kg-m. Although the threads were crushed, the bolts themselves were heated to the extent that they did not break in the midst of safety.
On 2017-08-25 14:50:27
Although a dent was attached to the screw thread, since it was not problematic in use, it was evaluated normally. I was satisfied if there was no dent.
On 2017-07-05 15:43:41
With m12, pitch 1.25, long bolt,
Nakanaka No, it was saved.