The reviews are automatic translation.
To the maintenance of the motorcycle
On 2017-10-30 18:06:25
After the maintenance of the motorcycle, from the genuine bolt to titanium weight bolt or stain bolt in many cases, for the purpose of weight reduction and rust prevention.
This aluminum nut is certainly light. You can understand the lightness simply by holding it in your hand.
However, although stain bolts are effective in terms of rust prevention, titanium and aluminum bolts are certainly lightweight, but they will not go as far as weight reduction.
The reason is that because the weight of the bolt is from about a few grams to a bigger bolt, it is about 10 grams, because the original weight is very high. Even if it is half the weight, the weight reduction is several grams. Even when 10 pieces are exchanged, it is often less than 50 g. Too lighter is too slight, well, it is a mood.
Weight reduction of car body
On 2017-10-05 20:32:53
I bought a lot after purchasing with free shipping fee adjustment. Pure iron bolt is heavy and heavy. Bolts that do not need strength are surprisingly large.
Ja 11 Jimny weight reduction
On 2017-08-04 20:40:59
I bought it with the free shipping amount matching. I am surprised many times surprisingly when exchanging it for aluminum bolt around the part where it does not apply excessively. It only makes sense to be in a sense to understand the lightness and effect just by having it. It is also attractive to have a high sense of security and heat dissipation compared to resin bolts.
Weight reduction of motorcycle
On 2017-07-14 14:54:51
The strength and quality of the bolt could also be used without any problem. I also want to use cheap price in the future
Weight reduction of bolts of bike scooter
On 2017-07-14 14:46:15
It was used for weight saving. Price was also cheap and strength was able to be used without any problem.
Bike step repair
On 2017-05-14 16:58:01
Especially it could be used without any problem. Items immediately arrived and it was saved.
For fixing motorcycle headlight
On 2016-10-04 18:06:13
Because it is 10 Φ and a bolt of a reasonable diameter, this aluminum bolt was chosen because it is heavy and rusts if it is iron. The light stay is also aluminum, so powder did not blow and it was just fine.
Motor scooter restore
On 2016-07-11 18:15:57
I used it to replace the bolt of the scooter, but it was possible to tighten without tightening with the specified torque
Fixation of equipment
On 2016-06-19 14:27:50
I wanted to use the same material as the base material to prevent electrolytic corrosion. There is no need to strongly fix, so it is very convenient to get such things normally.
For dry bike
On 2016-04-05 22:42:21
It was able to be 1/3 the lightness of the parallel iron. It is reasonably strong as it is made of 56S alloy, but I think that strength is enough if it is about M6.