The reviews are automatic translation.
Maintenance of motorcycle (by hobby)
On 2017-08-12 15:27:58
Other people have also written, but there are two sleeve nuts.
The hexagonal hole of the sleeve nut is too shallow and the wrench does not work well. Also, I do not need the monotaloid logo on the sheet part
When car maintenance
On 2017-05-22 18:34:43
The seat part is thicker than the cheap article of other companies and it is easy to sit. The cheapest A company's cheapest broke the caster in half a year so I hope to be able to use it longer than that.
Used for car maintenance
On 2017-05-13 13:46:51
I dare write in a sense to support the monotaro brand. It says that "Please fix the caster in the hole of the frame and the hole of the plate with the sleeve nut and washer from the top of the plate with step 1 explanatory sentence" in the instruction manual, but the outer shape of the washer is large, It does not enter into the hole of the frame either. Also, if the washer is a thing sandwiched between the plate and the sleeve nut, the inner diameter is small and it can not pass through the sleeve. We assembled without using a washer. The picture of the instruction manual is not a sleeve nut but a nut, so changed the specification? Is it? Hexagon socket of sleeve nut is inaccurate and hard to tighten. Also, it is difficult to hold the caster side when tightening, it is hard to tighten. Since the casters are fixed with a plate (resin) in between, if this is deteriorated, the caster will rattle. I think that it is better not to pinch the plate. Hexagonal wrench is included but it is unnecessary. People who use this product usually have it. If you want to attach with service, you can not assemble it unless a spanner is included. The attachment is incomplete. I joined the frames with "Step 3", but I felt that the spring washer was too strong (if you use attached tools, even more). As I wrote earlier, this process, spanner or wrench is necessary. Two sleeve nuts not included in "Parts detail" were attached. It is unknown purpose. Is it for repairing for fixing casters? The result was 4 washers and 2 sleeve nuts. We have not used the product in earnest yet, so please contact us as soon as possible after confirming this is correct. The feeling I used a little is not bad. I think that the movement will stabilize if the width of the caster wheel is a little more.
Used for sitting work.
On 2017-04-21 19:41:45
There are also other reviews, but casters and cushions are not good. Regarding cushion, there is no area problem. Because it is too soft, it is used for cushion addition. Caster is out of the question. It is used in exchange for a commercially available one. The frame is solid.
When vehicle brake overhaul
On 2017-04-21 12:45:06
With the aging of the year every year, the tightness of middle-aged work has been resolved.
On 2017-01-31 07:34:52
It is cheap but easy to use. I do not know the endurance, but I do not seem to have any problem with me. Just a sheet is very soft and fluffy. I'm considering replacing or replacing
On 2016-10-18 11:53:10
The caster got broken without using it for a week I started to move It suddenly the caster got injured and suddenly It was where I got hurt Even if the price goes up I want a little more strength And since the casters and nuts are not selling separately Used It does not become
Work on car maintenance and sitting
On 2016-09-07 16:50:01
At the time of purchase, we had parts replaced due to bearings of the canister. After that, we sometimes replenish grease and use it without problems. The resin tray is very convenient to put tools and parts, but the hole opened with a fly that dropped the driver from the knee. I want a little strength.
During machine maintenance
On 2016-09-06 09:25:12
The caster got off with the third use. Is the price only for the price? . .
During maintenance of equipment
On 2016-08-23 19:09:51
I'd like to say that it is recommended that it is comfortable and inexpensive, but the quality of the casters with it? Is it? Is it? is. About one week, the use frequency as used in a do-it-yourself carpenter, but the caster is rattling about 4 months, so it seems that it will not be usable soon. My weight seems to be too heavy at 80 kg weight. I do not mind needing to raise the price somewhat, so I would like you to use items of sufficient quality for these parts.