The reviews are automatic translation.
Drain bolt licking loose car
On 2017-10-19 15:34:28
I used it as a drain bolt of an oil leak caused by over-tightening with a stand somewhere.
I was going to change the oil pan, but I used this item for testing.
It is several times faster and better than working with tap dies.
Failure is not permitted, so turn it 2 turns, clean the return metal piece, use this work repeatedly several times. I can use it without leaking.
I think that it is better to increase the size and pitch as the improvement point is less variation.
Currently available size available only
Oil pan Maintenance
On 2017-09-22 13:00:47
The screw licked and the troubled end was thinking that the friend searched for this bolt, purchase, easy repair completed.
Oil leakage from oil drain repair
On 2017-09-07 14:43:36
I could tighten firmly and the oil leakage from the screw also stopped
It will be great if the price goes down a bit more
Motorcycle drain bolt for licking
On 2017-07-21 19:53:22
It was frightening a little, but I steadily screwed and tightened tightly
Correction of drain bolt hole
On 2017-07-03 21:34:05
I was asked to replace the engine oil of my family car, and from the time I unfastened the drain bolt, it was somewhat uncomfortable and I tried to remove it, the screw holes of the aluminum oil pan of the proposal had become useless. It seems that the gasoline station that asked for the oil change last time was the cause. I checked on the net, I reached this product, purchased, tried using it. As a result it worked, I was wondering if it would be an oil pan replacement, but it was extremely saved with this one tap bolt. It is a very good product.
Screw thread correction on the engine side of Super Cub
On 2017-05-31 15:52:22
Thread thread on the engine side became useless and oil leaked, but thanks to this product it was able to repair without trouble. It is safe because it can be used as it is after modification. We will keep stock in mind for anything in the future.
Licking the drain bolt
On 2017-05-29 14:45:42
I wanted variations such as M14 pitch 1.5 etc.
On 2017-05-21 10:33:07
It patched perfectly. I used it for a 125 cc scooter!
Bicycle oil drain bolt (for emergency measures)
On 2017-04-10 06:29:09
The female screw of the drain bolt was damaged and it was used as a first aid measure. There is no leakage, it seems that it can be used as it is. For long-term use it is watching.
Correction of oil pan and drain
On 2017-04-09 15:21:41
In my case, the hole diameter 12 mm (because I was completely licking, I drilled). However, tap bolts do not go in. I made the pilot hole 12.5 mm in diameter, but it will not catch at all. After all, it was finished in a short time by thread creation at No. 2 tap of M14 * P1.5. Because M14's No. 2 tap is not much in the home center, I thought that it was cheaper and more reliable to buy one tap from the beginning.