The reviews are automatic translation.
On 2016-12-02 17:00:51
We cut the relatively soft material such as aluminum and wood, but it was to use comfortably because the cut surface does not appear almost like clean, burr.
The life of the blade, you can use to adjust so that it can be used long because it depends on the rotational speed. Cheap is not perfect though.
On 2016-10-12 10:08:45
Buy did Ripito. Well it is written with the chips fly, but it does not have to fly it off a little slowly than cut the timber in the normal circular saw. Since the blade in the cut and iron-to-iron while pressing in the sense of turning off the veneer and rafters in reverse (personal feeling is but 5 Sunkugi, the cut and is in what never flew together screws) is spinning at high speed It is natural to lose. Feeling is I think better of the "cut" image.
On 2016-01-13 20:38:23
Although I used the plastic to the cutting I did not have a problem. After (so did about 10 minutes of this time use time) how much use can or durability problem is.
Of aluminum flat bar
On 2015-12-03 19:52:51
Slide, because you, but that does not fit the center hub specification
It requires a conversion adapter.
On 2015-10-24 21:57:29
It is perfect. Footwork is light work efficiency preeminent I can use is attached to the charging tool.
Cutting of aluminum pipe, brass rod
On 2015-06-26 11:01:59
Beauty of the quietness and the sharpness and the cut surface is of high-level products. However, there is a little anxiety in the durable surface, the cutting edge of the chip where the brass rod was cut 10 pieces of 7mm angle I have to one deficit. Does not have now is more blade chipping at the cause, but I think that it is too little early.
To make also a box in DIY
On 2015-04-12 05:36:03
The sound is also quiet, I was surprised. Sharpness is great. Surprisingly easy also, cut accurately. Once you cut ○ saw to make a gauge, it was cut precisely. It finished by applying a little file.
Cutting of FRP
On 2014-12-08 20:42:49
I thought well cut, but durability was not good enough.
On 2014-09-18 06:24:41
Good cutting force
Used to stage art production
On 2014-08-04 00:30:04
Purchased as spare parts of the circular saw that had been used before.
Since the cut even if there is metal, even if there are still dismantling during the nail has come in handy so you can cut without worrying.