Buy more than* S$200* and get FREE SHIPPING

Silicone Tube

4.38 (138)
Elongation (%)
360
...see all
Product Options
ADD TO CART
Inner Diameter (mm) Outer Diameter (mm) Heat-Resistant Temperature (deg C) Hardness Length (m) Color Material Package
Qty.
Ship pack of Mfr.# Item.# Sales Price Availability Qty.
Inner Diameter (mm) Outer Diameter (mm) Heat-Resistant Temperature (deg C) Hardness Length (m) Color Material Package
Qty.
Ship pack of Mfr.# Item.# Sales Price Availability Qty.
1 2 -40 - 200 50 +/-5A - Semitransparent Silicon rubber 1Roll(1m) 1 MGJG-1.0 45333924 1.32 SGD
In stock
10 13 -40 - 200 50 +/-5A - Semitransparent Silicon rubber 1Roll(1m) 1 MGJG-10.0 45333976 8.21 SGD
In stock
4 6 -40 - 200 50 +/-5A - Semitransparent Silicon rubber 1Roll(1m) 1 MGJG-4.0 45333942 2.04 SGD
In stock
5 7 -40 - 200 50 +/-5A - Semitransparent Silicon rubber 1Roll(1m) 1 MGJG-5.0 45333951 2.48 SGD
In stock
6 8 -40 - 200 50 +/-5A - Semitransparent Silicon rubber 1Roll(1m) 1 MGJG-6.0 45333967 8.50 SGD
In stock
3 5 -40 - 200 50 +/-5A - Semitransparent Silicon rubber 1Roll(1m) 1 MGJG-3.0 45333933 1.71 SGD
In stock
15 20 -40 - 200 50 +/-5A - Semitransparent Silicon rubber 1Roll(1m) 1 MGJG-15.0 45333994 14.47 SGD
In stock
7 9 -40-200 50+/-5A 1 - - 1roll(1m) 1 MGJG-7.0 22252527 2.55 SGD
In stock
0.5 1 -40-200 50+/-5A 10 - - 1roll(10m) 1 MGJG0.5 x1 x10m 22252554 5.76 SGD
In stock
2 4 -40-200 50+/-5A 10 - - 1roll(10m) 1 MGJG2 x4 x10m 22252588 9.86 SGD
In stock
4 6 -40-200 50+/-5A 10 - - 1roll(10m) 1 MGJG4 x6 x10m 22252615 14.87 SGD
In stock
10 13 -40-200 50+/-5A 10 - - 1roll(10m) 1 MGJG10 x13 x10m 22252676 46.52 SGD
In stock
2 4 -40-200 50+/-5A 1 - - 1roll(1m) 1 MGJG-2.0 22252502 1.04 SGD
In stock
1.5 2.5 -40-200 50+/-5A 1 - - 1roll(1m) 1 MGJG-1.5 22252493 0.85 SGD
In stock
1.5 2.5 -40-200 50+/-5A 10 - - 1roll(10m) 1 MGJG1.5 x2.5 x10m 22252572 8.38 SGD
In stock
12 16 -40-200 50+/-5A 10 - - 1roll(10m) 1 MGJG12 x16 x10m 22252685 81.65 SGD
In stock
1 2 -40-200 50+/-5A 10 - - 1roll(10m) 1 MGJG1 x2 x10m 22252563 6.57 SGD
In stock
0.5 1 -40-200 50+/-5A 1 - - 1roll(1m) 1 MGJG-0.5 22252484 0.64 SGD
In stock
5 7 -40-200 50+/-5A 10 - - 1roll(10m) 1 MGJG5 x7 x10m 22252624 18.96 SGD
In stock
6 8 -40-200 50+/-5A 10 - - 1roll(10m) 1 MGJG6 x8 x10m 22252633 19.75 SGD
In stock
7 9 -40-200 50+/-5A 10 - - 1roll(10m) 1 MGJG7 x9 x10m 22252642 23.22 SGD
In stock
8 10 -40-200 50+/-5A 10 - - 1roll(10m) 1 MGJG8 x10 x10m 22252658 33.32 SGD
In stock
9 12 -40-200 50+/-5A 10 - - 1roll(10m) 1 MGJG9 x12 x10m 22252667 42.65 SGD
In stock
2.5 4 -40-200 50+/-5A 1 - - 1roll(1m) 1 MGJG-2.5 22252518 1.16 SGD
In stock
8 10 -40-200 50+/-5A 1 - - 1roll(1m) 1 MGJG-8.0 22252536 4.06 SGD
In stock
2.5 4 -40-200 50+/-5A 10 - - 1roll(10m) 1 MGJG2.5 x4 x10m 22252597 11.38 SGD
In stock
3 5 -40-200 50+/-5A 10 - - 1roll(10m) 1 MGJG3 x5 x10m 22252606 13.18 SGD
In stock
12 16 -40 - 200 50 +/-5A - Semitransparent Silicon rubber 1Roll(1m) 1 MGJG-12.0 45333985 11.45 SGD
In stock
9 12 -40-200 50+/-5A 1 - - 1roll(1m) 1 MGJG-9.0 22252545 4.16 SGD
In stock
15 20 -40-200 50+/-5A 10 - - 1roll(10m) 1 MGJG15 x20 x10m 22252694 119.90 SGD
In stock
ADD TO CART
Customer Reviews
5 star 87
4 star 25
3 star 19
2 star 5
1 star 2
Review Rating: 4.38
138 Customer Reviews
The reviews are automatic translation.
Connection between ink tank and print head
5
From Japan
On 2017-08-08 13:09:19
Because it is silicon, it will stretch well. Even for a nipple which is somewhat impossible in thickness, it can be extended and used well. Silicon hose is convenient because it saves different diameter nipple (haha)
This review is about item#22252502.
Motorcycle Maintenance
3
From Japan
On 2017-08-01 20:18:33
I use it for brake fluid exchange. Since it became old, I replaced it. The reason why you are using continues to be cheap is the best.
This review is about item#45333967.
Ih range hood slip prevention
5
From Japan
On 2017-07-30 16:03:37
I think that it is better if there is something with a cut in the tube
This review is about item#45333942.
Waterproof tape light
3
From Japan
On 2017-07-19 09:41:35
Although it is out of the range of use, I use it with the waterproofing of the LED tape light. Even with non-waterproof LED tape light, let's run through this and both sides are made of silicon If it blocks, it becomes waterproof specification, the material is slightly whitish and it is cloudy You may spread more than transparent. Even though you split in half and glued with silicone Is good.
This review is about item#22252536.
When exchanged
5
From Japan
On 2017-07-17 12:35:29
I tried it normally. Because it was not in the nearby home center, it is saved
This review is about item#22252518.
Maintenance of automobiles
5
From Japan
On 2017-07-01 18:46:52
Purchased for drain application of brake fluid. There is no particular problem in quality.
This review is about item#45333951.
Brake fraud exchange
4
From Japan
On 2017-06-19 20:31:11
Is there a feeling of stickiness around the tube a little? There is nothing wrong with anything that I felt.
This review is about item#45333942.
My own eyedropper cap
4
From Japan
On 2017-06-19 07:36:47
I made a "cap" for my eyedropper about 7.5 - 8.0 mm in diameter. It is regrettable that you can not paste the photos here. > Posting URL of external site or contents to guide access to it Because it seems useless, those who are interested please try goog with a word that seems to be related. I uploaded photos to other sites, so it may be found. Now, Although it is a syringe which can be disposable, since I intend to use it a couple of times, I wanted a cap so that the syringe itself and the surroundings would not get dirty, but just good quality ready-made goods could not be found, I decided to create it. The silicon tube was cut to an appropriate length, ACE (Ace) tip protection cap Https://www.monotaro.com/p/5893/5247/ Insert it at the tip and complete. On purpose, we used a cap with an inner diameter of 9 mm which is slightly thinner than the outer diameter of 10 mm in this tube in order to avoid slipping off easily with a little oil. When assembling it, because it does not enter as it is, Crush the tube side so as to fold it once and thin it, and insert it into the cap. As it is, as the tube is distorted, use a toothpick or bamboo chick or the like to push the tube a bit more forcefully from the inside. It will be completed if the tube spreads firmly and it closely contacts the inside of the cap. The cap shrinks against the force to be expanded, Since the force that spreads against the force to be crushed acts on the tube, it stops pretty firmly. The kind of adhesive is unnecessary, but worried persons may adhere / heat-bond. In addition, in actual use, because the dropper is wet and slides with solvent etc., Even if there is little allowance for the tube inner diameter and eyedropper drum diameter, it can be mounted and dismounted smoothly. Depending on the liquid handled by the eyedropper, there is a possibility that it will become detached if it gets tight in such a tight dimension, so please arrange the dimensions when copying.
This review is about item#22252536.
Incorporation into own products
5
From Japan
On 2017-06-07 17:21:29
The product arrived the next day after placing an order. Thank you very much. We have successfully installed it for air piping of our own products (marketed products).
This review is about item#22252615.
Exchange of Wausch Liquid pipe deteriorated and it broke and replaced
5
From Japan
On 2017-05-30 15:01:10
So soft and flexible it is easy to use and easy to finish the installation, the liquid also felt comfortable
This review is about item#45333942.

Related Products