Buy more than* S$200* and get FREE SHIPPING

Electronic Counter

5.00 (1)
This product is manufactured in Japanese standards. Please check the specification before you order.
Withstand Voltage (V)
AC2,000V 1min between * However between the non-charging metal part that is exposed to the inter-conductive portion terminal
Counting speed
30Hz / 5kHz switchable 30Hz: contact, non-contact. Minimum signal width 16.7ms (make ratio of 1: 1) 5kHz: non-contact. Minimum signal width 100micros (make ratio of 1: 1)
Impact Resistance
294m / s2 X, Y, Z directions 3 times each. Malfunction: 98m / s2 X, Y, Z directions 3 times each
Input Mode
Acceleration independent / phase difference / add / subtract / acceleration instruction
One shot time
Starting Time (sec)
2.5 or less (when the power is turned on start-up time)
Vibration Resistance
Double amplitude 4mm 16.7Hz X, Y, Z each direction each hour. Malfunction: double amplitude 0.5mm 10 over 55Hz X, Y, Z each direction each 10min
Standard / carry (counter)
Operating Temperature and Humidity Range
Over 10 over + 50 degC (save time over 25 over + 55 degC ), 35 over 85% RH
Electrostatic Yield Strength
10kV However malfunction 8kV
Output Opreration
One-shot / return / self-holding / Free / one-shot / free / match / Free / compare / free
Noise Immunity
Square-wave noise by noise simulator (rising 1ns, width 1micros). Common mode 2kV
Allowable Voltage Range(V)
DC24V during + / over 10%, AC85 over 250
External reset (minimum reset time: 50ms), manual reset, automatic reset
Power Consumption (VA)
4 (at AC240V)
Electrical life: 100,000 times (rated load, switching frequency of 30 times / min) Mechanical life: 50 million times (switching frequency of 30 times / min)
Display Color
Insulation Resistance (Mohm)
100 or more (DC500V megger by) * However between the non-charging metal part that is exposed to the inter-conductive portion terminal
Input Signal
Impedance at the time of contact or open collector connection ON (short): 1kohm following when OFF (open) impedance: 100kohm more short-time current: about 4mA
Control Output
Transistor output (NPN open collector): 100mA or less, 40V or less contact output [1c / 1a]: AC250V / DC30V 3A resistance load (cosPhi = 1)
Power Supply Voltage (V)
Power Supply for Sensor
Power Failure Memory
EEP over ROM (the number of times of rewriting more than 100,000 times)
Material (case)
7-segment LCD (LED backlight) count display: Height 9.5mm, width 3.97mm preset value display: Height 6.5mm, width 2.72mm
Number of Digits
6 digits, (in the case of a total counter, display 12 digits) display range over 99999 over 999999, decimal point position: the last four digits
Compatible Standard
EMC: EMI [EN61000 over 6 over 4]: EN55011 classAEMS [EN61000 over 6 over 2]: EN61000 - 4 over 2EN61000 - 4 over 3EN61000 - 4 over 4EN61000 - 4 over 5EN61000 - 4 over 6EN61000 - 4 over 8EN61000 - 4 over 11LVD : EN61010 - 1: pollution degree 2
Protection Structure
IP66 (IEC standard. However counter front only, but only at the time of the rubber packing)
Weight (g)
About 120
Mounting hook, rubber packing, terminal cover tightening screw (M3x8 P tight)
...see all
Product Options
Ship pack of Mfr.# Item.# Sales Price Availability Qty.
Ship pack of Mfr.# Item.# Sales Price Availability Qty.
1PC 1 DC-JB6-AW 46561295 209.90 SGD
In stock
Customer Reviews
5 star 1
4 star 0
3 star 0
2 star 0
1 star 0
Review Rating: 5.00
1 Customer Reviews
The reviews are automatic translation.
Used for cardboard cutters
From Japan
On 2017-05-03 21:48:04
I use the cardboard length for the count stop. It is easy to set the display easy to see and satisfied.
This review is about item#46561295.

Related Products