The reviews are automatic translation.
As a screen mesh exchanging tool
On 2017-10-05 18:38:27
This year for the first time I replaced my mesh mesh by myself. Convenient tools fit and it was saved. It went well
On 2017-08-23 17:32:01
Although it is used for screen reconstruction, the thickness of holding rubber is different depending on the house.
It can correspond to all thickness if it is this
Used to replace screen net
On 2017-08-14 15:22:02
I thought that I was using it very conveniently
① There are two roller parts
② It is attached with a spatula for a cone
A screenplay of a screen door
On 2017-07-19 17:29:15
Working time was greatly shortened by using twin rollers.
I pushed the rubber into the groove.
On 2017-07-14 10:15:41
It was quite useful.
Just stretch rubber in the direction of travel and trace the groove with a roller.
(Rubber does not pull)
It is an indispensable item for screen net exchange.
I think that it is used only in screen doors
On 2017-06-19 23:29:13
Without this it is inconvenient or time-consuming. I feel like I can substitute something, but because it is cheap
Net screen replacement work
On 2017-06-16 00:40:35
I was able to push rubber in the rake because it was a shape that was easy to put on the force using weight. Good workmanship, work can also be recommended as soon as possible.
Used to re-screen the screen door
On 2017-05-22 14:56:13
This is a necessity item. Cost performance is good, working time may be several times without this.
On 2017-05-12 14:29:31
I used it to change the screen door to pet defense. Since the presser rubber was a thin type of 2.8 mm, I bought this roller and it was successfully replaced. You can use it enough. .
Used for pressing rubber retainer when screen door is replaced.
On 2017-04-28 12:07:18
Because the roller is wide and narrow 2, it is convenient without having two tools. Since the spatula part is also slightly rounded, it is easy to do when pushing in the corner. However, if you use this spatula to pull out the cured presser rubber, the strength of that area is low because it is painful. The use seems to be better only to hold down the presser rubber push to the last.