The reviews are automatic translation.
Stand at the time of the experiment
On 2016-09-29 17:34:43
It has gone distorted around the screw that holds the plate, top is not flat. The screw is caught.
Used for level alignment at the time of the test.
On 2016-07-01 18:45:10
Conventionally had a level alignment by using a spacer, it is useful it can be adjusted in mm.
I think that the minimum thickness is a good bit more low.
Hobby of smelt fishing electric re - le of the table
On 2016-04-22 18:07:52
One of the two so heavy to carry great is I have divided into friends.
But it can not be helped because only the weight (some use is different.
On 2015-08-13 18:59:37
The lateral direction of inclination when the lifting knob and the front was measured.
<Immediately after purchase>
At elevated direction rotation (rotating the knob to the right): Right to 0.9 degrees
Direction during rotation (rotating the knob to the left) later: Left to 1.1 degrees
※ slope of plus or minus 2 degrees there at the time of lifting. The slope of the changes you can see with the naked eye.
<2 days after use from purchase>
At elevated direction rotation (rotating the knob to the right): Right to 2.1 degrees
Direction during rotation (rotating the knob to the left) later: Left to 3.5 degrees
※ plus or minus 5 degrees or more of the slope is located at the time of lifting. Play is greater in a few days with.
Is rotated vigorously in the descending direction, Suberidashi a laptop on the table. (It is not enough to fall)
I purchased in order to adjust the tilt of the bench with two, but it does not have that you can not use if you choose the direction to use.
It is a difficult situation to lift while maintaining the parallel alone. In particular, the slope will come gradually increases while you are using.
That said, it is a discount. It can be thought of as a price accordingly.
Optical bench test
On 2015-08-13 17:28:58
But a wide variety to this kind of product thing is almost 100,000 yen from those of yen thousands stand, this machine is the most inexpensive model. It can not match the expensive models with precision, but also rotates astringency of the knob is left, it was enough to the extent of the application to issue a parallel with the level placed at both ends under 10kg close optical bench.
Height adjustment to the bench of the step
On 2015-08-06 17:21:51
I purchased three to up to now, there is a handle individually rose with or stiff from the point of feeling, but you can use Well Well.
Measurements to the same height as much as possible at repetitive tasks
On 2015-05-05 22:51:43
That you do not move to attach the magnet to the rubber foot portion is in use.
On 2015-01-14 06:35:31
Compact and simple, easy to use.
Height alignment of the time of component assembly of the structure
On 2014-08-17 14:36:30
Poor horizontal balance, TOP surface is not lifted in parallel when the load is applied.
Support of the cabinet doors
On 2014-07-17 13:22:27
Pretty good was because, added purchase.
If the transverse direction a little stronger, I better.