The reviews are automatic translation.
Repair of bike bicycle
On 2016-06-24 07:36:02
But it could not be mounted if not a little remodeling was activated as I thought of myself. We are very satisfied.
On 2016-04-24 12:42:49
Because those of Chinese manufacturers was broken immediately buy did here.
Like a spark violently not suitable for me is this is also not in the very long-lasting likely.
In certain manufacturers compressor says 100v strongest seems not tolerate the contact most current.
I want it is flowing excessive current even without out fact until there certainly because it is compressor specs not impossible in 100v.
For the time being used in life extension, we will consider again.
On 2016-03-07 11:29:23
Is a general-purpose parts, but I could almost mounting without processing.
Probably because of the compatibility with the body, was the adjustment of the release pressure.
On 2015-11-25 11:27:58
Use the compressor repair of the old type.
Those of copper pipe is necessary to change to a nylon tube.
In 6kgON, 8kgOFF.
Firm can use.
Work, to air the work of hobby
On 2015-11-15 20:40:10
A pressure switch of other compressors that I bought from a hardware store ruin in their own mistake, I bought this product. Surprised to reach! The same as the ones that came with until now, the attachment is likely to be without worry. I think that it is quite general-purpose machine.
Pressure gauge, pressure reducing valve, remove the hose, if you put the other fixtures,
1/4 cross joints female, nipple, and to purchase, such as in combination with this cheese is convenient.
Remodeling of the unloader compressors
On 2015-08-24 15:16:09
★ modify or set is at your own risk! ★ screw 1/4 female, copper pipe is 6mm. OFF at about 0.8MPa, it is set to ON at about 0.6MPa. Since open the case and a brief description on the back of the lid is written, it seems to be able to set the pressure of the ON / OFF in the clue. Since the very cheap can be modified, it is old but is recommended to those who have a healthy unloader compressors.
On 2014-11-13 15:25:20
It has become the model specified but almost generic. It was other models are available in Pong with. Atmospheric pressure adjustment width was enough use is not very widely.
Two protection bush of the cable inlets is separately going to need to be prepared.
As part replacement of the compressor
On 2014-06-02 18:09:40
Very I think that broke the pressure switch of the old DIY for an air compressor (arc land Sakamoto GREAT TOOL GTAC-07510), a variety looking for was a result, we arrive at the pressure switch for this BCP-381.
Because it is pressure switch, anyway mean I should give me moving in the specifications, there is no problem in that regard.
It was carried out without any problem even pressure adjustment.
I want to use for many years to come.
The repair of the use of compressors for paint.
On 2014-01-30 13:53:47
I was struggling to find the parts but was saved. No way is to be in the MONOTARO · COM? Once again, but when you need them something I think that in MONOTARO I happy if there is a way to understand something about the repair. It survives and can be post-peripheral components also look for.