Rust-up of the bike parts
On 2015-08-24 18:57:59
Use the old bike of restoration
Parts of dirt, used to rust, so glass bead (sphere), compared to the blast material such as silica sand, is good not too sharpener.
In particular, I think that it is good, such as the aluminum parts.
Finish will be the blast distinctive gloss (satin).
If the mirror finish is required, before the blast in the process to remove the corrosion part, how OK be carried out buffing after.
Instead of the place is also the gun nozzle to brush and does not reach the precision nozzle, if you use, but more in the order of corrosion, you can cleanly polished in seconds to a few minutes of the thing.
Once you start using sandblasting, or wire brush, is to Sri Sri with sandpaper became troublesome.
Tricks: outdoor (garden), a bucket, a book blasting material I tried to be polished with a blow sucked up by the suction and beaten in water gun nozzle, it is the first trout.
The base material is not shaved, I feel that fall only dirt. (Cleanup is very)
To the sandblasting, it requires a minimum of the following equipment. Anyway dance dust.
※ blast cabinet, the blast gun, compressor, dust collector, protective equipment (safety glasses, gloves, etc.) is required.
On 2015-07-14 18:27:09
Still, No problem less. Seems not mean you are using over and over again, is a good trade be considered from the price, we are the future thinking also purchase at the granularity difference.
Satin finish of Platinum
On 2015-02-26 13:30:35
Satin was purchased as a test of the finish. Because I wanted as a test, this amount is just right.
Finish was also obtained the finish feeling as intended.
Fine thing of the count also, is where I want to sell at such a small size.
Parts Shine used bike.
On 2014-02-21 06:59:02
There is no way you can write the comparison is not accurate review because for the first time use, but now clean as the dirty parts is almost thought for a long time. Because the glass beads does not seem to be able to peel off the paint, but is effective for polishing. Beads and of Me a little more crude, I would want to be using alumina.