The reviews are automatic translation.
Drilling to the wood
On 2016-12-25 17:22:17
At the time of drilling to the wood, because it does not shift the cutting edge from the punch mark, it is very easy to use is good.
On 2016-12-13 09:18:39
Image and product of the tip shape of the screen is different. You can use the stop hole, but does not use crack on the back side is likely to occur if the through-hole. The commodity image you should use the image of the same shape. We had decided decision to purchase only in the image. It was wasted.
Drilling of wood
On 2016-08-06 22:57:55
It was quite clean dig a hole if you get used to it.
First, although Makurimashita shake when you were using to open the pilot hole, clean ^ ^ converge blur and stop the pilot hole;
On 2016-06-07 16:31:03
Previous triangle of the product is not in the vicinity, it has come in handy.
Thabo for drilling
On 2016-03-07 14:44:02
If you're using a cheap drill until now, vibration during drilling is very, hole also had gotten larger (the center is shifted).
This is of course but if rightly say, but accuracy has neat, was able to clean drilling.
Round recessed hole drilling work
On 2016-01-17 08:41:43
Pressing strongly the electric drill during drilling seems to center is shifted. Also considered also a cause that electric drill is not in the vertical. In order to prevent displacement, do not press strongly the electric drill at the start of drilling. The outer blade can drilling not shift the center if we press strongly when it reaches the plate.
On 2015-12-15 08:42:25
Woodworking lathe we use in drilling. Previously a bit of a screw will be attached to eat the material, the But there is that the motor would stop, ahead triangle does not occur is also such a thing, can be used safely. Not sold in the countryside of the DIY store, I did not know say there would be such a tool. I'm glad if you know soon. It is very satisfied.
Because of bench production of plate
On 2015-10-29 13:05:08
On making the bench in a single plate
As long as you can do with drilling to be used in connection with dowels
High accuracy so as not to shift
I was looking for a drill. Since the sharpness can also be selected freely also well depth
I guess the good shape of the tip that I'm glad I bought
On 2015-10-14 19:39:01
It is also written other people, but it is good to be stopped at any depth. After that, although there is also a type of tip is engraved in the triangle as a whole blade even if they are not made to the screw, here is also good flat. Other sizes if necessary I would like to also be used.
Drilled wood hole of
On 2015-08-29 21:09:46
Than those that had been used until now, cut was not very good.