The reviews are automatic translation.
Car power supply construction
On 2018-04-10 15:14:32
I used it immediately, it was smaller than I thought.
There is a little worry about strength.
When conducting live line measurement (voltage, resistance) etc. or repairing electric parts etc., when wearing indoor wiring attached to a tester
On 2017-11-20 22:57:11
This test lead wire is generally small and thin, so it is not suitable for measurement.
To repair the card tester
On 2017-11-07 22:30:08
Since the test lead of the card type tester has become tattered, purchased for replacement.
When I saw it, it seemed that the shorter one that was not a probe was likely to be used, truncate the probe and replace the test lead.
I need to solder the needle to the tip of the shorter grip, so that it can be measured by stabbing it from above the covering.
On 2017-02-16 17:07:22
I connected the test lead with a 12V bulb and used it to search for the power source of the car. Although the lead is thin, it can be used normally.
For lead replacement of small tester
On 2017-02-14 13:42:41
Although it is cheap, it is too rough. The lead length of red black is 2 cm different, the hardness of the lead is different, the plug of the smaller one is bad molding or the pin is bent.
Since the lead of the old tester was broken, it was finally possible to measure
On 2016-04-23 06:31:11
Because it was a small tester, the lead is small and it is useful