The reviews are automatic translation.
On 2017-04-07 15:48:01
It was aligned with no size to the hardware store.
On 2017-02-19 13:46:15
Punch you are dealing in the vicinity of the home improvement, Toka those of small holes, because it does not deal with the punch of a large hole, and here this time to 1mm ~ 4mm, we bought several items of up to 25mm ~ 30mm. You think that it is good value in price, the sharpness is also usually good. However, if it becomes 30mm of punch, firmly fixed, beautiful not be released to the If you do not exactly hit with decent big hammer. Punch of 25mm ~ 30mm has firmly truly Gotsuku. I think very good as a commodity.
On 2017-02-03 14:25:35
Because the punch to use as a hobby, less expensive ones without the need. However, roughly looking at the punch set consisting of a set of a diameter of 5mm in the do-it-yourself store. Then, punch a total of six purchase of up to a diameter of 1mm ~ 4mm in Monotarou's. Sharpness is also sufficient, pricewise to be value for money. It was good.
Track of the city - when you build the door, you open the hole with a punch.
On 2016-05-13 23:20:19
Well, a hole was bored.
Fuel pump packing production
On 2016-02-29 05:27:20
A malfunction fuel pump of Yumbo, parts are also not available, packing bad air Sucking not well can produce a state packing, repair in your tool that finally Sagashiate because we used get stuck in a capacity shortage in the fall equation by tank mounted it is complete. The long-awaited installation tank as kerosene tank during the stop at the start, you cage conduct tempura waste oil 99% power generation agriculture. Thank you very much.
Skin packing production
On 2015-11-13 01:09:49
It is a multi-purchase, but there was some slight deformation
It is good in general.
On 2015-08-31 15:46:50
I think that individual differences but but, in the arrived goods does not open holes in the leather.
I blade of the punch is not attached at all.
Although the punch that can not be punched hole was thought also returned or exchanged because it is defective
I put a blade on your own.
By the way leather is a leather of 1mm position that tried to open,
It was only collapse to not cut also also hit hit.
After sharpening, even if not hit to open the hole cut at the press by hand.
Cut a circular from the color sheet
On 2015-06-29 21:19:27
Since the small diameter of the circular seal is required, I used punched.
Clean can circular seal can not needle hole in the center like a circle compass.
Since there are a variety of size, I would like to align if you need in the size difference in the future.
Drilling of aluminum very thin
On 2014-10-16 19:15:22
Damaging the tool has been found. Other suitable methods have tried to do so can not be used to easily, but to a hole of as you imagine, I could use the time being. Price also enough cheap, practical and satisfaction be disposable.