The reviews are automatic translation.
For weeding work
On 2017-06-30 14:58:34
Can Al Edge be used normally? In grass cutter manufacturer genuine products there are also things that can not be wound 3 to 4 meters in length wound, I think that there are few drawers at the moment. It is not insufficient in intensity, but I would like more strength if possible.
On 2017-06-10 20:59:14
it's the best. I could buy cheap and good ones. I look forward to working with you·
Parking weed mowing
On 2017-05-09 16:02:40
The nylon cord comes out very smoothly with smoothness.
Mowing on the slope
On 2017-05-09 10:10:19
Although I tried various code cutters, it's easy to set up as the name is called fun, less trouble (or no trouble), it is the best among what I know. We can recommend!
Weeds naturally growing near the block fence
On 2017-02-05 17:01:48
The weeds naturally growing near the block fence had been removed by a cord cutter before but frequently replaced the cutter. I did not change it from work and work became easier.
Grass cutting on road
On 2016-11-24 17:09:49
It is easy to send out nylon cords without detaching the cover etc. easily, it is easy to send, I tried using several kinds until now, durability is also good. It will be very satisfying if the price goes down a bit.
Cutting small, soft grass
On 2016-10-31 11:47:35
Can not be mounted on the mowing machine body. One washer is insufficient. The screws can not be tightened, they will be left over.
On 2016-07-23 18:08:36
Even nylon cutter is best and I am satisfied with efficiency improvement of work.
On 2015-10-18 00:15:31
Until now, I have tried variously, but I think this is the easiest to use. However, if you order one order, I would appreciate it if you can increase the number of windings a little more.
Mowing work of rice paddy ridge
On 2015-07-18 10:04:31
I love the simplicity of cord exchanging and winding, I used it until I give up on the second cover scattering. Because the cord comes out just by the stone etc touching the lower cover during work, I wound the cord frequently. If you use it for half a day, the code will not come out even if you hit it. The reason was that dirt came in between the case and the case cover, and the cover did not move upward. In this case, it is necessary to detach from the harvester, disassemble and clean by removing the two screws on the top. I am using the company Elba B now. Although the above problem almost disappeared, it is inferior in that it is troublesome for code replacement and code winding can not be done unless it is disassembled. Mr. Sanyo Metal, we ask you to commercialize good-selling products of both.