The reviews are automatic translation.
It is used for taking out heat-treated products from the electric furnace.
On 2018-04-02 17:58:53
Excellent heat resistance, we are using with confidence.
A little, there is a feeling of goby feeling, the point difficult to use is Tamani, scratches.
Removal of food iron plate
On 2017-11-20 10:46:13
Although this glove alone reduces the heat and it is easy to work, but as the heat is still transmitted and hands hurt while continuously using it, towels etc are also used together. In the glove which says the same function it is useful because it is rather low price.
For heating of metal
On 2017-11-11 23:45:22
Since many heat-resistant gloves are expensive, I bought this cheap one. It reached too much size and laughed. Although the hand is big, there is too much room to do even if you wear gloves inside. Although it is better than small, women think that it is better to judge the actual thing from the shape of the photograph as "total length 26 cm" or something. Since there is thickness, heat resistance seems to be high.
Formation of iron at around 350 degrees
On 2017-09-15 21:28:57
Although I feel that I saw it as big, I think that it is tolerable to use another one under the glove after putting it on it.
Low pressure casting, mold repair
On 2017-08-19 13:34:10
Until now, although it was corrected by using two cotton gloves
When using this heat-resistant glove on cotton gloves
Can work without getting hot
Used for oven cooking
On 2017-05-17 06:33:39
Because the hands are small, it is a bit hard to use the glove is too big.
Removal of baked goods.
On 2017-03-09 15:20:41
Until now, the table gloves melted by heat in the work of two gloves and the hole was opened, but this is not such a koto. Also, this glove alone can withstand enough heat. The size is slightly big.
Used when washing the mold
On 2015-11-14 14:18:53
Up to now I have used two cotton gloves in a pile of two, but this glove is OK with one piece so it will be saved. It is easy to desorb and you can work there so much even if you touch a mold close to 200 ° C. However, if it gets wet it will be transferred directly to the heat, so we use this glove for rubber gloves, detachment and opening of mold during cleaning.
For kitchen oven
On 2015-07-28 01:26:11
I use it for taking out and putting out the top plate of the gas oven. It is easy to use because it is a glove, and it is useful because it does not feel the heat even at 250 degrees. The price was also reasonable.
Removing the pan oven board
On 2015-05-10 17:55:37
It is used in an environment of 200 to 250 ° C. Where you can wear it with a sense of gloves is good. Heat resistant effect is also good, fingers are also easy to move.