The reviews are automatic translation.
Used for subdividing high temp oil containing pale cans
On 2017-11-18 11:28:47
As the other person says, the stuffing of the installation is hard. Because it seems to be broken due to resin as it is forced to install it, I use it with holding it with one hand.
Although it is grateful that it is structured to be able to adjust the pipe for suction according to the depth of the can, on the other hand it is unlikely that one who uses it is likely to not notice this thing, So you should attach instructions.
The oil siphoning is done without problems.
Mission, use the differential oil exchange.
On 2017-06-12 22:47:18
It's very easy to use and the job is going back. There is one drawback. Depending on the car, there are some types of metal fittings that are too far from Earl and do not enter.
When exchanging oil
On 2017-06-10 10:30:06
Although the hose is a little soft, there was no problem in use.
Ship's engine oil supplement
On 2017-03-20 16:37:01
Oil flow is bad. Oil remains in the hose and does not come out. Oil cleaning after use is serious. By the way, I am using oil No. 30.
Differential oil change operation
On 2016-11-20 15:26:18
It is used for replacing the differential oil and replacing the ATF. It is easy to use and no problem.
During oil change
On 2016-07-12 00:08:51
The lid mouth does not snap closed
On 2016-03-07 21:29:03
I am using it for exchange of CVT fluid. It will shorten the working time and it is easy to use and useful.
Lubrication of lubricating oil (toner and Vactra)
On 2015-07-15 16:00:48
Everyone says, installation on the pail can is initially stiff, but it will settle if it is removed several times. If you hit it rather loose, you will loose it while using it.
Car oil change, oil change of 4 cycle outboard motor
On 2015-05-26 21:54:32
Because it is hard to install on the mouth of the 20L can, it can not be installed properly, it restrains the main body with one hand, pumping with the other hand. I think that it is good if a more simple and sure installation method can be done!
Gear oil, oil injection into the differential
On 2015-04-04 12:16:41
It is not possible to fix to a commercially available pail can. If the mouth is protruding like Mt. Fuji you can fix it but there is a commercially available oil port and it can not be used for a pail can with a recessed groove like an oil reservoir around it. Although it is equivalent to the price, it is structurally funny to the extent that it can accommodate this? Because the fixing can not be done, the pump is staggered and the work efficiency decreases.