The reviews are automatic translation.
On 2016-09-18 21:58:42
Iron, copper, stainless steel, well cut.
Than the blade of the poor of high-speed steel, expires.
Since the bite is included in the room rate is small, blade, hard to miss.
It will now be in this.
Cut may be.
Pipe, cut, such as a plate
On 2016-08-15 17:07:47
Five entered I used three of are, but if the two are using over to strengthen the tension, I have expired before the blade becomes useless. It was found that cracked If you look at the rest of the new to the joints. Loosely stretched to use seems to be only no.
Cutting of plate material such as stainless steel
On 2015-12-28 18:12:45
LUXO's was used in U-32. It might be how to use the manufacturer's unexpected, but failure (slip and chatter, etc.) without, we can use in the same way as genuine blade. What is more expensive than the blade of genuine products is a pity, because the blade of the genuine product has become a waste version, I did not have a choice. Thick is not expired (30mm) or more of stainless steel (will bite even off slowly), when it was iron or aluminum, thick material also was able to cut without any problems.
[Add] cutting with a R is difficult when compared to the blade of the genuine products.
Cut of SKD material SLD material
On 2015-07-15 15:46:39
But it had been cut to buy the maker of the blade
So use to buy here is from shipping to save the order of the price you have to buy because the middling early
On 2015-06-03 09:39:42
Until now, has been using the cutting teeth of the various manufacturers, this product is the best.
Production and processing of auto parts.
On 2015-05-21 23:10:57
I was using the manufacturer product until now, but I purchased to try once.
I think from now want to try the durability. I think that now is sharpness does not change almost.
Since the amount of money is also cheap, I appreciate if and consumables reduction?
Cut of metal-based General
On 2015-04-25 15:05:02
Although sharpness itself is not bad, when compared with Hitachi genuine
To early blade itself that the cracks in the joint expires
Since the crack would life itself is short.
More cheaper if short of life (by cracking) is not worried
Price itself will feel a sense of expensive because there is no genuine and great difference.
Stainless steel SUS317L round bar cutting
On 2014-12-20 00:27:14
Than bar code, I feel a little bit to have a good. You can not affirm so I think there is a lot difference.
I want to try if there even count the edge of a more Susame.
On 2014-11-05 13:46:16
It referred to as a little cheap price.