The reviews are automatic translation.
On 2017-10-29 11:12:12
I think that it is easy to use although I think that it depends on the material of drilling because the cutting edge is thin.
On 2017-07-23 14:32:37
It was inexpensive and expensive in price, and it was a tool with good workability. It was easy to maintain.
For lighting fixture drilling
On 2017-06-20 17:11:46
Wood and nails etc. are satisfied as well. Since we are using some shafts, unnecessary items inside the Holsau can be taken out easily.
I wanted to open a hole of 48 circles in 100 mm square wood
On 2017-04-25 12:42:09
When looking at the catalog and purchasing it is 38 mm which is effective length (openable depth) 38 mm misread as 100 mm of the total length of the adjacent print character. It was quite pleasing because there was no hole saw size, what I ordered without confirming well. I wanted to plug in a steel round tube 48 mm. Even remove the 38 mm front and back, afterwards use fleas, round wood drills.
Gypsum board, siding board drilling
On 2017-04-05 19:07:46
It is good for price. I think that durability is also no problem.
Drilling of pipe
On 2017-03-24 15:18:06
I used it for drilling an iron pipe. I managed to have up to three places, but after that my teeth are missing and it is not usable.
Piping, drilling of wood
On 2017-02-07 17:56:18
Is it too sharp at the beginning of use? Into what I think, I dig into boards. It was good that I bought it carefully, and I recommend it. I also want a hole saw with a different diameter, but what I want is almost missing. We confirmed it for several weeks, but do not recover but want to buy in other stores or troubles We would like the inventory to be secured as soon as possible.
On 2016-12-14 17:51:17
Because it is a hexagonal axis, I think that it will be impacted, it is thick and does not enter. Although it stated 10 mm in the description, I judged the photograph. There seems to be no use for a while. . . It is regrettable. . .
Drilling of wood
On 2016-12-13 17:18:09
I do not want the hole saw of this hand so much I am saved because this manufacturer is complete in units of 1 mm. I think that durability is also a good direction.
On 2016-11-25 13:11:05
I used a low speed drill to drill a hole, but when the hole became deeper and torque became necessary, although it still has a depth of 2 cm or more, it can be broken at a part that becomes round and thick from the hexagonal axis lost. Regrettable part of the hole saw is good.