The reviews are automatic translation.
On 2017-11-17 13:26:01
I used it for repairing a portable compressor.
Because genuine products are difficult to obtain repair parts, such parts are very helpful.
Used for tabletop drilling machine
On 2017-11-13 11:01:49
Slightly loose cheap so order one size smaller.
Pulley belt application of dental X-ray developing machine
On 2017-10-15 17:18:13
Because manufacturer genuine products became unavailable, we purchased trials of almost the same size and used it as a substitute, but for now it seems to be no problem. I'm planning to buy two or three sets and preliminarily keep it.
On 2017-07-03 17:14:22
I ordered it by mistake and I could not use it. Later I ordered for dryer.
During machine maintenance
On 2017-06-26 20:07:59
I could not use it due to mistake of buying.
I am displaying the center circumference, so please be careful.
For transmission of rotation from the motor shaft of the tabletop drill bit to the drill mounting shaft
On 2017-06-15 15:05:41
I wanted the total length of the belt to be 24.5 cm, but since I ordered 25 cm, the tension of the belt is a little weak, but it seems to be somehow able to use it. The belt was planned to purchase the material and fuse it and make it annular, but since there was a fused product, it saved the trouble of fusion bonding.
I used it to restore a projector of 8 mm movie. Motor → Pulley
On 2017-05-30 22:01:30
I was able to use it obediently without problems. In the case of regeneration of old machines, the rubber belt is degraded in most cases and will not be usable, so this urethane belt replaces it. Thank you very much.
Mini drilling machine drive belt
On 2017-05-10 17:21:27
I think that vibration is small and it is very good. There is no slip, transmission efficiency is also good.
For compressor pulley drive
On 2017-05-06 14:54:27
I purchased it as a replacement because the belt which I used before has deteriorated and has broken. For now it is in good condition and it is working well at the moment.
Motor drive of instrument (vib)
On 2017-02-23 15:06:33
I made a welded cord cord belt, but I could not do it properly and as a result I found that there is a round belt if I know the diameter. Was saved……