The reviews are automatic translation.
Homebrew cart direction rudder axis
On 2017-07-17 14:19:12
It was hard to get used to parts of this hand, but it is a very good slide.
To the gas gun hammer pivot.
On 2017-07-06 18:52:50
Used for custom hammer pivot of gas gun. We buy a hammer with a certain ok too because the hole is large so we settle it. It is convenient because it really gathers everything.
Machine part production
On 2017-07-02 15:23:07
It is a standard product. It can be used without problems. It is saved because various parts can be bought in bulk.
Handmade dolly wheel handle Mounted on the moving part of the moving part
On 2017-05-21 11:00:08
It is a part that is not put in the home center so much and it is very satisfactory to buy it in units of 1 for small quantity use.
Electric cart steering device
On 2017-05-15 16:05:56
I thought that there was such a part and purchased it. I am satisfied with enough use.
During machine maintenance
On 2017-05-06 16:15:27
It is very helpful because it is a part not sold inside. I will order again.
On 2017-04-10 08:19:39
The bush attached to the part where the foot support of the wheelchair is attached was troubled because it collapsed or gone. It was saved because it is perfect for size.
Slide work through the linear shaft
On 2017-04-03 13:47:16
Since the inner diameter of the bush and the shuff and the outer diameter did not match with each other slightly through the linear shaft, there was a backlash so we used a fluorine tape tensioned on the shaft
To reduce the wear of the slow moving moving part of the prototype and to ensure smooth operation stabilization.
On 2017-03-09 22:20:01
It is super cheap, it is small as the difference between the inner diameter and the outer diameter is small and it is small, so it was the best for parts of this device.
Maintenance parts for live steam
On 2017-02-28 18:14:48
I am thankful for the low price and ease of processing that can handle more than enough of the steam engine's high temperature and humidity!