The reviews are automatic translation.
Bicycle maintenance
From Japan
On 2018-03-25 22:43:21
Bicycles are troublesome as they require different sizes and special tools than cars and motorcycles.
Because it is uneasy thickness if it is one sheet, I use two sheets in a stack.
It is preeminent as Cospa.
Bicycle repair
From Japan
On 2018-01-27 22:15:01
As you can see, the tool is the right place for you, it looks delicious, but you can work reliably.
Bicycle repair
From Japan
On 2017-10-23 09:51:52
Used to disassemble the rear shaft with three interior decoration. I was able to turn it reliably. Good for price as well.
Bicycle maintenance
From Japan
On 2017-10-05 21:40:50
Used when attaching and detaching the wheel. It can be used enough because it is a tool to be used on a bicycle.
Bicycle ball bearing adjustment
From Japan
On 2017-07-28 18:29:24
I tried to grease up the bicycle wheel bearings, hang this spanner on the inside, and turned with the glasses wrench out, but it got so distorted.
Maintenance of bicycle hub
From Japan
On 2017-07-21 23:54:36
Although the price is cheap, things are hub spares that can be used firmly.
When hub is disassembled
From Japan
On 2017-05-27 23:51:21
It can be used without problems. I think that shopping was possible.
Adjustment of ball push of internal gearbox
From Japan
On 2017-04-03 21:41:09
When trying to loosen the screw on the left side of the interior transmission (NEXUS INTER 5) of the bicycle, it was understood that it was necessary to have a thin spanner of 14 mm. I had 13, 15, 17 of MonotaRO made hub contrenes, but I did not have 14, so I chose this rather than buying the same 14. Looking at the product photo, the thickness was about 4 mm and only the part in contact with the nut looked like 2 mm, but in reality it was pressed 2 mm iron plate, the whole was 2 mm is. (In the picture, the bulging part appeared to have wall thickness) One side is 13, 15 mm, the other side is 14, 16 mm, and this exactly the same one is included. I think that it was better to have two identical items unnecessary and another one to have a wall thickness of 3 mm. Although it looks quite cheap, this is enough for functional reasons. Looking at the existing review, there are writes that use this wrench for the part where large force is applied, but this is only for the part where only a thin spanner of less than 3 mm is entered.
Maintenance of road bike
From Japan
On 2017-03-29 22:59:03
I tried maintenance of the hub of the road bike. There was something that I could lick well at Habspana until now, but this product was strong and there was never to be licked.
When wheel is attached / detached
From Japan
On 2017-03-25 15:37:30
Anyway it seems easy. Rigidity is still alright, but minimum necessary