The reviews are automatic translation.
Drainage of wastewater
On 2017-03-25 17:43:38
It is supple, easy to use, well passed through the water, and you can take out garbage.
Gasoline tank scrap removal
On 2017-03-12 18:57:24
60 mesh stainless steel mesh was made into a cylinder and hand stitched using a mesh wire, then it was inserted in the plasticity body, fixed to the main pillar with wire, it was well done.
As a filter for cutting fluid
On 2017-03-03 16:02:37
It is attached to the tank of cutting fluid of the milling machine and it is used for removing the facet. It seems that most of the facets have been removed with two meshes of number 40 and 100.
Used for farming vegetable spraying work,
On 2017-01-20 15:10:48
As I did not know which one I ordered and I did not know what to favor, I purchased it when I thought it was broken, but I used it when putting pesticide into the sprayer, but if the mesh is not detailed enough, the nozzle will become clogged and it will be useless, next purchase At the time of understanding, I got a general understanding of the mesh number so please give me a mesh plate that can pick up fine garbage,
Used as filter for cooling fan of precision machine
On 2017-01-13 21:40:22
Cooling fan The insecticidal mesh of the air intake port became clogged due to aged use and became impossible to clean it, so it was for replacement. Noise was reduced and the cooling function improved.
Ventilator fan filter
On 2016-12-11 21:53:20
I used it as a filter for a 40 cm class ventilation fan. The terminal was reinforced with aluminum tape. It is pretty beautiful as soon as you wash it.
On 2016-06-08 16:14:55
There is no particular problem.
For machine maintenance
On 2016-01-31 16:05:39
Purchase as a material for a strainer in a gasoline tank of a motorcycle or a generator Purchased more than 100 mesh until very good
In one experiment
On 2015-06-27 14:58:37
Satisfied with price
Intake fan of self-made personal computer For dust filter
On 2013-12-25 15:09:03
A hole for a fan which is opened in a commercially available personal computer case is a little big both intake and exhaust except for the front fan, and dust is not penetrated halfway. Filters that match the fan size are being sold by each manufacturer, but most of them are sponge filters to impede the fan's air volume. As I was searching for something else good thing, I knew this product, purchased it quickly, processed and worn. The goods of this hand, of course, naturally can not be found at home centers, etc., it is very useful. Somewhat to install? Although processing was necessary, it is done well in finish. I am sorry that I can not show you with images. Currently it is used for intake fan duct of my own personal computer, but since dust also invades from the hole of the exhaust fan of the PC which is not in operation, it is currently trial and error repeated. I talked a lot and took time and labor to finish it pretty well. The above-mentioned Einex Filter is a good example of it, because the thickness was different, rattling occurred, so try squeezing a 1 mm thick double-sided tape. In another case, I fix it with a frame that also holds my own mesh again. I use vinyl chloride plates and bolt nuts to fix holes by drilling holes in the case, I am pretty rough. There are also points of reflection saying that it would have been better to make the mesh a fine one a little more. However, when considering strength and tension, I am also thinking that this area is just right. We are planning to contribute images with Connecnet as well, so please expect it. Hey, when I'm getting along, the year will end. ^ ^;