The reviews are automatic translation.
Machine maintenance, overhaul
On 2017-06-24 20:49:03
It becomes more usable when combined with the bit of engineer's screw Bazooka than the attached screw bit. It is more convenient with optional slim type and hex type. Because I can use 6.35 mm bit, I think that it will be relaxed when combined with other company's bit.
Used for a crushed screw
On 2017-04-29 17:25:44
For small screws? I used it for the M8 screw of the motorcycle, but it did not come off, the cutting edge and the main body were broken in just one time.
Remove the collapsed screw of the stainless steel door knob
On 2017-03-20 18:41:22
I was able to remove the screw according to the image. Thank you very much for helping me
Peujeot 106 direct lid of lid is hard to hear
On 2017-02-27 22:05:46
It is the highest I did not turn around even if turning the hand skin turns but I got licked but I thought that there was only this tool from the start of rotation with a single shot I recommend that you can hit it
When it is tightly closed and it is likely to lick with a normal driver, when it gets licked
On 2016-06-10 13:53:53
It is very easy to use and you can use it with confidence, if you have a little bit of groove left it can be loosened easily using a short bit.
Removal of solid roller screw
On 2016-06-07 10:11:21
Rust & screw holes I used when exchanging a roller door that was quite crushed. Oil spray, electric screwdriver, things that reinforced the crushed screw hole etc were tried and failed. This was the easiest that I bought with no good. I am impressed with the resolution in 5 seconds.
Change door hinge
On 2015-12-14 14:40:59
It is perfect for removing small screws. It is no longer possible to tame the head.
Screw small screws
On 2015-10-07 17:28:15
It was planned to be used for "screw removal" of a small screw like the one used on a personal computer. Although I ordered without understanding well whether it is possible on the Web, it also corresponded only to a relatively large screw like a door hinge screw. In the future, if you get useful things with "screw removal" for small screws, it is planned to purchase immediately.
M6 - 12 Used for removal and removal.
On 2015-09-20 17:29:48
I used it to remove M6 - 12 size, but I could not do it well. I think that it is fine if it is a thin screw.
Used when screw head is collapsed
On 2015-03-09 17:03:07
It is easier to use than I thought.