The reviews are automatic translation.
Aluminum sash door roller mounting screw
On 2017-10-06 17:51:51
The teeth of the drill easily broke into the licked screw, and when screw of the reverse tap was screwed with left rotation, it was possible to easily start turning the screw. It is excellent.
On 2017-09-22 14:46:50
From the first time I use it, I loosen it almost in one shot.
Blowing spray oil etc. beforehand, the worry that the work after penetrating for about one night will damage the tool is surely reduced.
On 2017-07-29 08:33:55
Recent engineers can not loosen or narrow the screws.
It seems natural to lick a screw.
It is a very useful bit to hollow it.
Work efficiency also improves, it can remove it cleanly.
Door hinge licking bolt removed
On 2017-07-19 14:33:34
I found it on the net and bought it at Monotaro san.
It is extremely easy to handle and will be advanced products.
Screw crush, rust thread
On 2017-07-14 15:56:49
The usage described on the back side did not come with a pin at all, but as I started working I felt the screw went out quickly.
The thread mountain collapsed, and because it was a water field, the back of the screw was rusted but it was so much work done.
It was hard to remove the bit from the screw which was removed ^ ^
To remove the licked bolt
On 2017-05-14 15:07:08
It is quite useful product, I think that it is satisfactory thing.
Licked screw removal
On 2017-04-28 19:59:37
It was easy to remove screws that could not be removed even by screw Zaurus. It saved me.
Maintenance of machinery
On 2017-04-18 14:54:04
This is the only thing to turn the screw that licked my head! I bought it, but it was not as much as I thought. A bit of the screw will break the bit part of this product. After all, the screw does not turn, it is one bit of par ... Sorry
The thread has run out
On 2017-03-23 15:33:37
This product (drill side) is attached to electric drivers. How to drill a hole with a drill against a licked screw. After that, turn this product on the opposite side (screw side) and reattach it. Turn the electric drill in the reverse direction and thrust the product into the place where you drilled the hole earlier and turn the drill, the licked screw was taken off
Removing old curtain rails etc
On 2017-02-23 20:13:33
It was easy to use although it was convenient and easy to use