The reviews are automatic translation.
Drilling into stainless steel door
On 2016-10-25 16:42:27
Sharpness is good There is only well-known manufacturers products. I think that a little long the center drill.
Drilling of steel (4.5mm)
On 2015-07-08 20:44:59
I drilled holes in 10 places of square steel, how likely go hole saw yet, how has fallen off the center drill. I bought one to spare is likely settled without for a while.
On 2013-07-18 13:11:01
Because it was cheap, but I thought by Na Do not cut too much, in spite of the price you satisfied sharpness is also good.
For alkaline ionized water apparatus attached to a sink, a hole to the stainless steel top plate.
On 2012-05-02 14:52:40
Without difficulty I was able to drilling. Speaking greed, reinforced version of the bottom of the stainless steel plate also was the best if there is a depth that can be drilled together. The upper side of the cutter was unable to penetrate because it is wider.
Perforation of 2mm stainless steel plate
On 2010-10-04 16:09:30
In the drilling of 2mm stainless steel plate, in Yakubusoku in inexpensive carbide cutter or bimetal, it is difficult if not also those of this class. Indeed There is only manufacturer goods, expensive but off well.
On 2010-06-21 08:18:08
Drilling of stainless steel plate
On 2010-01-30 14:54:31
There is only manufacturer goods and preeminent of sharpness.
Since the only use a few times and it is stainless opponent in carbide
I am glad when the other made a little cheaper.