Solid-State Timer H3Y-2, DC Power Source H3Y-2 DC24 1S
H3Y-2 DC24 1S
Ship pack of
This product is manufactured in Japanese standards. Please check the specification before you order.
Operations with time limit
Maximum Time Scale
Time Limit Contact
Plug-in (surface mounting) 8-pin
Operating Temperature Range (deg C)
Operating Time Variation
less than +/-1% (at full-scale)
Insulation Resistance (Mohm)
100 or more (measured with DC500V mega)
10 or more,000,000 times (no load, opening/closing frequency 1800 times per hour)
Effect of Temperature
less than +/-2% (at full-scale)
Electrical Service Life (rated load)
More than 500,000 times (AC250V 5A resistance load switching frequency 1800 times/h) (at room temperature)
0.1s or less (including in-process reset)
Before time-up : about 0.1W
After time-up : about 1.1W (at DC24V)
Allowable Voltage Range(V)
85 to 110% of power supply voltage
For continuous use at 50degreeC, please use 90 to 110% of the supply voltage.
2 6 directions, 3 times each Vibration Resistance
10 to 55Hz, single amplitude 0.75mm, 3 directions, 1h each
less than +/-2% (at full-scale)
External Dimensions (Width (W)x Depth (D)x Height (H)) (mm)
Below 21.5 x 63 x below 28
35 - 85%
Electrostatic Yield Strength
4 kV (malfunction), 8 kV (breakage)
0.1s - 1s
10 or more% of the supply voltage
Power Supply Voltage (V)
Operating Ambient Temperature (deg C)
-10 to +50 (however, no freezing)
AC250V 5A resistance load (cosphi=1)
Minimum applied load DC5V 1mA (P standard and reference values)
-10 to +55 (however, no freezing)
Storage Temperature (DegreeC)
-25 to 65 (however, no freezing)
Square wave noise simulator (pulse width of 100 ns/1micros rise 1 ns)+/-1.5 kV
less than +/-10%+/-50ms (at full-scale)
Impact Resistance (Malfunction)
2 6 directions, 3 times each Vibration Resistance (malfunction)
10 to 55Hz, single amplitude 0.5mm, 3 directions, 10 min each
Between conductive terminals and exposed non-charged metal parts (excluding terminal screws): AC2000V 50/60Hz 1min
Between operation power supply circuit and system control output: AC2000V 50/60Hz 1min
Between unlike pole contacts: AC2000V 50/60Hz 1min
Between non-continuous points of contact: AC1000V 50/60Hz 1min
Power terminal spacing: 1k
Conductive terminal and exposed non-charging metal spacing: 1.5k
Customers Who Viewed This Item Also Viewed
6 Customer Reviews
The reviews are automatic translation.
On 2017-12-11 15:23:09
Ultra-compact timer, easy to install, sufficient opening and closing capacity.
Control of electric fan
On 2017-12-06 10:48:18
I think that it is easier to use if the setting dial of the timer has a sense of moderation.
The LED stop lamp blinks for the timer setting time and then switches to lighting
On 2016-05-04 20:17:19
I am satisfied with the amount, quality. Occupation is "maintenance of equipment" Omron products are treated and easy to use.
Work machine pump timer
On 2015-06-29 19:16:57
It is compact. Easy to set up, saved.
Sequence change of power supply equipment
On 2013-12-22 18:04:35
· · · · It was ordinary Omron product! Of course the operation is perfect! It is!
Used for 12 volt battery power control
On 2013-11-06 22:42:26
I am satisfied with the product, but I am struggling to install it because detailed instructions are not attached. Next time I purchase I also want to have instructions.
Customers Who Bought This Item Also Bought