NoteBuy more than* S$150* and get FREE SHIPPING

  • Micro Basic Switch Type Ss
  • Micro Basic Switch Type Ss
  • Micro Basic Switch Type Ss

Micro Basic Switch Type Ss SS-5GL13

4.62 (13)
Package Qty.
Ship pack of
23.44 SGD
In stock
Now we ship to...
...see all
Item Feature
This product is manufactured in Japanese standards. Please check the specification before you order.
Appliance Classes
Class I
Protection Structure
Allowable Operating Speed
0.1mm - 1m/S
Minimum Adaptable Load
DC5V 160mA
Impact Resistance (Malfunction)
Actuator Type
Hinge R lever type
Ambient Humidity
Below 85%RH (at 5-35 deg C)
Impact Resistance
Maximum 500m / s 2
Contact Resistance (mohm)
50 or less (initial value)
Mechanical Durability
30 million times or more (60 times / min)
Vibration Resistance (malfunction)
Frequency 10 to 55 Hz Double amplitude 1.5 mm
Inrush Current (A)
Normally closed : maximum 20 normally open : maximum 10
Electrical Durability
More than 200000 times (30 times / min)
PTI Tracking Characteristics
Contact Arrangement
Contact Interval
Rated Current (A)
Terminal Type
Soldering terminal
Rated Voltage (V)
Force for Operating (OF) (N)
Maximum 0.49
Contact Materials
Contact Specification
Allowable Operating Frequency
Mechanical: 400 times/min Electrical: 60 times/min
Withstand Voltage
Between homopolar terminals: AC1000V 50/60Hz 1 min Between charged metal portions and ground: AC1500V 50 / 60 Hz 1 min between each terminal and non-charged metal parts: AC1500V 50/60Hz 1 min (at the time of separator use)
Weight (g)
About 1.6 (PIN push button form)
Operating Ambient Temperature (deg C)
-25 to 85 below 60% RH (no freezing or condensation)
Insulation Resistance (Mohm)
100 or more (at insulation resistance tester DC500V)
Customer Reviews
5 star 9
4 star 3
3 star 1
2 star 0
1 star 0
Review Rating: 4.62
13 Customer Reviews
The reviews are automatic translation.
From Japan
On 2016-09-04 12:42:07
Standard types from the old days, high reliability are various used Repair, is essential switch to maintenance
This review is about item#39097712.
Maintenance of the TEAC tape deck T-3600
From Japan
On 2016-08-03 17:16:33
40 years ago of the equipment was revived in splendid. It is a good feeling like a new one. However the operation feeling since the switch to the new is new, but is a matter of course.
This review is about item#32576731.
From Japan
On 2016-06-13 14:55:51
Operate reliably, and have the confidence
This review is about item#32576731.
Electric winch repair
From Japan
On 2016-04-07 18:34:36
Micro-switch of the take outright sensing sensor of electric winch was purchased because it was stuck broken. Without any problems repaired. There is no each shop stock also went to Akihabara, was saved arrived the day after the order is found in Monotarou's. It was good if you ask to Monotarou's from the beginning.
This review is about item#39097816.
Switch for call push button
From Japan
On 2016-02-13 17:04:56
You have to use and usually, there is no problem, we do not have, especially improvements.
This review is about item#32576722.
We used to repair the intercom.
From Japan
On 2015-11-01 20:32:20
I was satisfied with the goods, but I was surprised to excess packaging. In that kind of packaging, also will consider buying at other stores. Also asked for improvement from the point of view of resources and environmental issues.
This review is about item#39097712.
Torch switch
From Japan
On 2015-10-13 17:19:09
Poor contact per exchange of the torch switch. Soldering without if problem possible.
This review is about item#02501256.
Repair of washroom foot switch
From Japan
On 2015-05-18 17:15:20
Since the space is little, but took a lot of force at the time of installation, the hinge was saved without or kink.
This review is about item#39097737.
Electric gun
From Japan
On 2015-05-13 20:10:41
Purchased as an air gun of a switch made overseas. It was a satisfactory result.
This review is about item#39097816.
Milling machine limit switch
From Japan
On 2015-02-27 21:05:40
Mounting holes is 2.35mm. It is fixed at M2 of the screw, but the through-hole of normal M2 is 2.2mm, slightly larger. I tried to cut the screw with a tap of the M3 to try (M3 tapping holes are 2.5mm in standard). Screw of safely M3 was able to make. Easy attachment can be likely.
This review is about item#39097746.