Prism Standard Type Proximity Sensor Tl-N/-Q TL-Q5MC1 2M
- TL-Q5MC1 2M
- Package Qty.
- Ship pack of
- This product is manufactured in Japanese standards. Please check the specification before you order.
- Maximum Ink Ejecting Frequency (Hz)
- 500 (average value)
- Working Voltage Range (V)
- DC10 - 30
- Material (case)
- HEAT-RESISTANT ABS
- Differential Movement
- 10% or less of detection distance
- Connection Method
- Cord drawer type
- Cord Length (m)
- Material (detection surface)
- HEAT-RESISTANT ABS
- Protection Structure
- IEC standard IP67
- Voltage Influence
- Power supply voltage +/- detects when the rated power supply voltage within 10% of the distance +/- 2.5% or less
- Detection Object
- Magnetic metals (detection distance will be reduced for non magnetic metals.)
- Protection Circuit
- Reverse connection protection and surge absorption
- Ambient Humidity (% RH)
- Behavior: when you save: each 35 to 95 (with no condensation)
- Insulation Resistance (Mohm)
- More than 5 (500 V DC MEGGER MOTH AT) BETWEEN THE CASE AND CHARGE OF BULK
- Control Output
- Switching capacity to NPN (DC30V below) less than 50ma open collector
residual voltage: 1 V or less (code 2 m length and load 50 mA current at time)
- Impact Resistance
- 200 m / s2 X, Y, 10 time for Z all directions
- Power Supply Voltage (V)
- DC12-24 Ripple(p-p) Less than 10%
- Detection Distance (mm)
- Standard Detective Object (mm)
- Iron 15x15x1
- Setting Distance (mm)
- 0 - 4
- Leakage Current (mA)
- Direct-current 3 line type NPN
- Operating Mode (when approaching objects detected)
- Ambient Temperature (Degree C)
- During operation and preservation: each-25 to + 70 (not during freezing or condensation)
- Indicator Lamp
- Detection display (red)
- Withstand Voltage
- AC500V 50/60Hz 1 min between Charging batch cables and case
- Effect of Temperature
- At + 23 degree c within the temperature range of-25 to + 70 degree c when using the sensing range: +/- 20% or less
- Consumption Electric Current (mA)
- Ten (DC24 V:00) or less
- Operation manual
- Vibration Resistance
- 10 To 55 Hz double amplitutde 12 1.5mm X,Y, and Z (all directions)
Customers Who Viewed This Item Also Viewed
| 5 star
| 4 star
| 3 star
| 2 star
| 1 star
4 Customer Reviews
The reviews are automatic translation.
It uses the safety device of the machine.
On 2016-07-11 13:20:15
Inexpensive purchased from the current product has become possible. We would like to further cost down.
Stop of equipment sensor
On 2016-07-05 23:27:29
Sensors of the same type was therefore exchange went wrong.
I bought the code 5m, but was room at all in the 2m.
We use without problems.
Of the existing mechanical failure substitute
On 2015-02-22 18:48:35
Maker (OMRGON) does not have is a problem off-the-shelf
Machine is many are used sensors to equipment.
On 2014-03-13 15:43:39
Since it is a part that you want immediately to arrange as spare parts and very helpful to arrive immediately after the order.
Customers Who Bought This Item Also Bought