Prism Standard Type Proximity Sensor Tl-N/-Q TL-Q5MC2 2M
- TL-Q5MC2 2M
- Package Qty.
- Ship pack of
- This product is manufactured in Japanese standards. Please check the specification before you order.
- Differential Movement
- Less than 10% of the detection distance
- Connection Method
- Code drawer type
- Cord Length (m)
- DC 3-wire NPN
- Operating Mode (when approaching objects detected)
- Maximum Ink Ejecting Frequency (Hz)
- 500 (average value)
- Power Supply Voltage (V)
- DC12 to 24 ripple (p-p) 10% or less
- Insulation Resistance (Mohm)
- Case between whole charging part (at DC500V mega) 5 or more
- Control Output
- (Cable length 2m and at the load current 50mA) 1V following: switching capacity: (DC30V or less) residual voltage NPN open collector 50mA or less
- Impact Resistance
- 10 times 200m / s 2 SUP> X, Y, Z each direction
- Voltage Influence
- Rated supply voltage at the time, less than 2.5% +/- of sensing distance at 10% within rated supply voltage +/-
- Detection Object
- (Detection distance may be reduced to a non-magnetic metal.) Magnetic metal
- Protection Circuit
- Reverse connection protection, surge absorption
- Ambient Humidity (% RH)
- Operating and storage: (with no condensation) each 35-95
- Detection Distance (mm)
- Standard Detective Object (mm)
- Iron 15 x 15 x 1
- Setting Distance (mm)
- 0 to 4
- Material (detection surface)
- Heat-resistant ABS
- Protection Structure
- IEC standard IP67
- Working Voltage Range (V)
- DC10 to 30
- Material (case)
- Heat-resistant ABS
- Consumption Electric Current (mA)
- 10 or less (DC24V time)
- Instruction Manual
- Vibration Resistance
- 10 to 55Hz double amplitude 1.5mm X, Y, Z each direction 2h
- Ambient Temperature (Degree C)
- Operation time,Reserving time:Each-25 to +70(No condensation, No freezing)
- Indicator Lamp
- Detection table shown (red)
- Withstand Voltage
- Case between the 50 / 60Hz 1min whole charging part AC500V
Customers Who Viewed This Item Also Viewed
| 5 star
| 4 star
| 3 star
| 2 star
| 1 star
4 Customer Reviews
The reviews are automatic translation.
It uses the safety device of the machine.
On 2016-07-11 13:20:15
Inexpensive purchased from the current product has become possible. We would like to further cost down.
Stop of equipment sensor
On 2016-07-05 23:27:29
Sensors of the same type was therefore exchange went wrong.
I bought the code 5m, but was room at all in the 2m.
We use without problems.
Of the existing mechanical failure substitute
On 2015-02-22 18:48:35
Maker (OMRGON) does not have is a problem off-the-shelf
Machine is many are used sensors to equipment.
On 2014-03-13 15:43:39
Since it is a part that you want immediately to arrange as spare parts and very helpful to arrive immediately after the order.
Customers Who Bought This Item Also Bought