NoteBuy more than* S$150* and get FREE SHIPPING

  • Prism Standard Type Proximity Sensor Tl-N/-Q

Prism Standard Type Proximity Sensor Tl-N/-Q TL-Q5MD1 2M

4.50 (4)
Package Qty.
Ship pack of
39.21 SGD
Shipped after 2016-10-31
Now we ship to...
...see all
Item Feature
This product is manufactured in Japanese standards. Please check the specification before you order.
Material (case)
Heat-resistant ABS
Differential Movement
Less than 10% of the detection distance
Connection Method
Code drawer type
Cord Length (m)
Material (detection surface)
Heat-resistant ABS
Protection Structure
IEC standard IP67
Protection Circuit
Load short-circuit protection, surge absorption
Ambient Humidity (% RH)
Operating and storage: (with no condensation) each 35-95
Insulation Resistance (Mohm)
Case between whole charging part (at DC500V mega) more than 50
Control Output
(Load current 100mA, cord length 2m at the time) 3.3V below: switching capacity: 3 to 100mA residual voltage
Impact Resistance
500m / s 2 X, Y, 3 times each direction Z
Voltage Influence
Rated supply voltage at the time, less than 2.5% of sensing distance +/- 15% within rated supply voltage +/-
Detection Object
(Detection distance may be reduced to a non-magnetic metal.) Magnetic metal
Power Supply Voltage (V)
DC12 to 24 ripple (p-p) 10% or less
Detection Distance (mm)
Standard Detective Object (mm)
Iron 18 x 18 x 1
Setting Distance (mm)
0 to 4
Leakage Current (mA)
0.8 or less
DC 2-wire
Operating Mode (when approaching objects detected)
Maximum Ink Ejecting Frequency (Hz)
500 (average value)
Working Voltage Range (V)
DC10 to 30
Withstand Voltage
Case between the 50 / 60Hz 1min whole charging part AC1000V
Effect of Temperature
Within a temperature range of -25 to + 70deg C + 23deg C during the sensing distance + 10% or less
Consumption Electric Current (mA)
Instruction Manual
Vibration Resistance
10 to 55Hz double amplitude 1.5mm X, Y, Z each direction 2h
Ambient Temperature (Degree C)
Operation time,Reserving time:Each-25 to +70(No condensation, No freezing)
Indicator Lamp
Operation table shown (red), setting table shown (green)
Customer Reviews
5 star 2
4 star 2
3 star 0
2 star 0
1 star 0
Review Rating: 4.50
4 Customer Reviews
The reviews are automatic translation.
It uses the safety device of the machine.
From Japan
On 2016-07-11 13:20:15
Inexpensive purchased from the current product has become possible. We would like to further cost down.
This review is about item#02501782.
Stop of equipment sensor
From Japan
On 2016-07-05 23:27:29
Sensors of the same type was therefore exchange went wrong. It's cheap. I bought the code 5m, but was room at all in the 2m. We use without problems.
This review is about item#39098062.
Of the existing mechanical failure substitute
From Japan
On 2015-02-22 18:48:35
Maker (OMRGON) does not have is a problem off-the-shelf
This review is about item#39098114.
Machine is many are used sensors to equipment.
From Japan
On 2014-03-13 15:43:39
Since it is a part that you want immediately to arrange as spare parts and very helpful to arrive immediately after the order.
This review is about item#02501782.