The reviews are automatic translation.
After the time of paints used, used during the cleaning of the instrument.
On 2015-06-21 18:07:32
Strongly in a solvent, it will protect your hands.
Currently there is no particular improvements and the like.
It is willing to fully play a role.
Speaking have to only, a little extra part of the fingertips of the gloves,
Kana not suitable for fine work? .
For protection during work
On 2015-03-27 09:26:15
Since consumables I think also buy when they are no longer. I'm using for many years, but a strong, easy-to-use.
Work of degreasing
On 2014-08-12 13:25:20
It is using at the time of the degreasing work of metal products.
We are allowed to buy for less expensive than the other.
Thin and you easy to work, but on the other hand is there is a drawback because the defeated as soon as there is a burr even a little.
Because is consumed in large quantities, we will purchase to be of 10% off day the future! !
When the cleaning of the printing plate (for the use of a solvent)
On 2014-05-22 14:32:26
There is a sense that the material has a thin for waste
On 2014-03-30 15:30:29
Since the price arrives early cheap, we use.
We are using the paint work.
On 2013-10-15 09:47:19
Strong is the Toka thinner but torn and there are burrs on the component, or is impossible, but I wish I was a little more durable?
You can not buy because of the cost savings because although I bought the thick of things price becomes high.
Cleaning of the plate after printing
On 2013-04-19 09:52:37
Easy to grasp is waste because it does not stiff
But once the use time would extend long.
On 2013-03-25 13:20:49
In no time I have a hole in one side of the fingertip. .
The other is to use and durable.
Although usability is I think a good, what initial failure?
In order to use a cleaning solvent of the screen after printing plate
On 2013-01-19 09:01:51
But I was using the M, L4 and asked to know that there is a handling of S in Zuraku this time your company and the work is too large for women from before.
Workability is familiar with the hand well, easy to fine work. Etc. We are very satisfied. Thank you very much.
Gasoline, lacquer thinner or "paint Clean" w, etc.
On 2012-04-20 02:45:26
And fuel, such as gasoline such that if normal glove stinking,
Lacquer thinner, also dealing with a solvent such as "Paint Clean",
Us to protect the finger to tough. For me is a necessity.
Just so thin, when dealing with cutlery such as sharpening spoofing the scraper is,
Care must be taken so that the finger does not hit.