NoteBuy more than* S$150* and get FREE SHIPPING

  • Small Time Counter H7 Et-N
  • Small Time Counter H7 Et-N
  • Small Time Counter H7 Et-N

Small Time Counter H7 Et-N H7ET-N

5.00 (1)
Package Qty.
Ship pack of
79.42 SGD
In stock
Now we ship to...
...see all
Item Feature
This product is manufactured in Japanese standards. Please check the specification before you order.
Number of Digits
Opreration Method
Time: +/-100 ppm (25 deg C)
Electrostatic Yield Strength
+/-8 kV (malfunction)
Reset Method
External reset/manual reset
Case Color
Light gray
Impact Resistance
300 m / s26 direction 3 times each
Withstand Voltage
AC1000V50/60 Hz 1 min The metal parts and exposed non-charging terminal conductive part
Counting Input
Non-voltage input
Vibration Resistance (malfunction)
10 To 55 Hz cantilever amplitude of 0.15 mm 3-direction each 10 min
External power supply/needlessness (battery built-in)
Protection Structure
Only IEC standard IP66, the U.S. NEMA standard type 4 (indoor), however only the panel surface
Insulation Resistance (Mohm)
More than 100 (with DC500V mega) The metal parts and exposed non-charging terminal conductive part
Noise Immunity
Square wave noise by noise simulator (100 ns, 1 microm s rising 1 ns) +/-500 V (TOTAL INPUT / BETWEEN THE RESET TERMINAL )
Water proof packing, the adapter for embedding attachment, a unit seal
Safety Standards
Get the UL863 CSA C22.2 No.14 EN61010-1 (IEC61010-1): EXCESS VOLTAGE CATEGORY / POLLUTION DEGREE 2 III COMPATABILITY EMC STANDARD (EN61326)COMPATIBLE VDE0106 Part100 Compatibility (finger protection provisions) "UL863 CSA C22.2 No.14 acquisition
Character Height (mm)
Ambient Humidity
25 - 85%
Back Light
Minimum Pulse Width
(Time check) 1 s
Mounting Method
Embedding attachment
Weight (g)
About 60
Display Type
LCD (digital display by a crystalline liquid) (it displays by zero suppression)
Vibration Resistance
10 to 55Hz single amplitude 0.375mm 3 directions every 2h
Impact Resistance (Malfunction)
200 m / s26 direction 3 times each
Time Specification
(Display) 0.0h - 999999.9 h/0.0 h - 3999d23.9 h (switch change)
External reset/manual reset (20 ms of the minimum reset signal time)
Operating Ambient Temperature (deg C)
-10-+55 (however, don't dew and freeze over)
Impulse Voltage(V)
Between 4.5k / conductive part terminal, and the exposed non charging metal part
Storage Temperature (DegreeC)
-25-+65 (however, don't dew and freeze over)
Counting input / reset input Short circuits: maximum impedance 10 k in ohm ON RESIDUAL VOLTAGE DURING SHORT CIRCUIT LESS THAN 0.5 V (1.0 V POWER) Opening time minimum impedance 750 k ohm more at OFF
EMC Standard
EMI:EN61326 Radiated interference field intensity :EN55011 Group 1 Class B EMS:EN61326 Electrostatic discharge immunity : EN61000-4-2 ELECTRIC FIELD STRENGTH OF IMMUNITY: (AM MODULATION) N61000-4-3, (PULSES MODULATING) EN61000-4-3 EN61000-4-6 CONDUC
Customer Reviews
5 star 1
4 star 0
3 star 0
2 star 0
1 star 0
Review Rating: 5.00
1 Customer Reviews
The reviews are automatic translation.
Operating time measurement of the sewage pump
From Japan
On 2014-04-04 17:58:36
If the LCD screen is exposed to sunlight for a long time, it may display disappears. Overlooking the durability improvement of the external environment.
This review is about item#37651634.