The reviews are automatic translation.
Additional meter installation
On 2017-03-03 15:42:57
Drill a hole of 52mm in the dashboard,
It was fitted with a current meter.
Skin does not become tattered,
To Burezu, we were able to cleanly open.
Drilling of the stainless steel ball (cookware)
On 2017-02-23 14:59:23
We were able to work without any hindrance.
I think that it is good goods cheaper.
Drilling to 6mm aluminum.
On 2017-01-30 12:01:38
Sharpness is good, satisfactory. Some are surprised. However, there is no problem. Cosmetic boxes, cool.
Drilling operation of the piping to the factory within the existing stainless steel basins
On 2016-12-17 10:37:22
Stainless steel thickness was the end to not be boring and worn that one cutting edge was higher rotational speed due to the use of the impact in some of the narrow place was more than 3mm. Next somehow work with, but the completed hole saw diameter 100mm, etc. baby Thunder is you plan to use another hole saw.
On 2016-11-22 00:42:36
Nikotekku direct sales in the amazon in price surface in the same products for about 6 discount from the list price, is monotaro's was a little unhappy about 3 discount.
Drilling of the insulation panel
On 2016-08-06 16:55:20
Well it has expired. We were able drilling without any problems. Cutting debris if there is a spring I may not clog large minute diameter only effective short amount than the length of the hole saw (part of the interior of the core is sticking out toward the cutting edge) Noto base is reinforced because through work is 100 points on our side, because I think it is a fire ant whether is cruel to ask up there for this product.
On 2016-05-24 10:23:42
Is good cheap and very workability.
Drilling of iron
On 2016-05-18 08:42:30
it is good.
Drilling of thick iron plate
On 2016-04-17 13:26:53
Than I thought also, sharpness well, personally I like than the chip hole saw. Sharpness as well, and quite long-lasting. 32 mm thick steel plate was also seen apart from the ins and outs.
Thick flat bar drilling
On 2016-03-02 18:16:02
Iron plate of 10mm thickness if slowly the feed using the cutting oil by drilling machine was also possible through somehow, cutting edge fly if the impossible.