The reviews are automatic translation.
Screw mountain modification of bike parts
On 2016-09-28 18:44:33
You can also use without any problems
Made in China and also solid difference making is
For the bonnet mounting
On 2016-06-09 17:12:42
Since the bolt holes in the hood had collapsed, I was allowed to buy here. Because was not long enough, but was used in the two with, I can use without discomfort.
Repair at the time of the screw hole destruction
On 2016-05-01 05:27:58
It is a good idea to practice to buy the larger amount because the trick is necessary for installation
Screw holes reinforcement
On 2016-04-30 20:50:58
Very good products have been previously used. On the other, requires a dedicated scan Prieure taps and fittings
Processing of plastic parts of general industrial machinery
On 2016-03-24 15:45:15
For Supuryu itself, we are satisfied with the quality, the price of both.
Other person also has to fill out, but 10 pieces subdivision bag, there is no description of the standard.
In this regard, we strongly demanded the improvement.
On 2016-02-26 16:47:04
For previous reviews
On 2016-02-12 10:29:33
Representation of the standard is not in the ○ packaging bag
↑ at the time of manufacturer shipment are listed in the box, or bag.
○ Supuryu is dally
↑ Will the fact that the outside diameter is large?
The outer diameter of the pre-insertion (free outer diameter) is made larger than the tap hole.
It becomes more difficult to pull it out from the base material by increasing.
M3 largest free outer diameter of 4.11, M4 is 5.42.
Used to change from ○ M8 to M6
↑ is improper use.
Supuryu can not be used for the purpose of reducing the bolt size.
Since the maximum of tap pilot hole diameter of the M6 is 6.42, too large under hole of the M8.
Please refer to the size of the table of the manufacturer website for the pilot hole.
It is used to be asked to strength in plastics processing.
On 2016-02-08 18:08:49
Even before the buy did to replenish because the stock is no longer buy, because there is a sudden production stock is in the manner not to cut, (because it is not purchased at the hardware store)
Internal thread modification of brake caliper of aluminum body
On 2016-01-14 16:02:42
It was purchased in the previous HC is, because it was a little longer rather than only of D1.5, purchase of this time 1.0 thing. Ease of use is good, I think that cheap in price basis (However, since the higher postage that it is the order of separately, is good buyers to be shipped at the time of buying)
As Helical insert processing to the metal parts
On 2015-09-03 16:44:41
Although I was allowed to several orders this time, none of Izu is a representation of the standard (M-3 0.5 × 2.0D, etc.) in the packaging bag, so was very handicapped and at the time of processing, by all means give me the improvement of the point To do.