Due to the national holidays as Golden Week, we will close 2017/5/3~2017/5/5. This may cause delays with our responses. Thank you for your understanding.

Buy more than* S$200* and get FREE SHIPPING

  • Sprup for Metric Thread, for Coarse Screw Thread
  • Sprup for Metric Thread, for Coarse Screw Thread
  • Sprup for Metric Thread, for Coarse Screw Thread
  • Sprup for Metric Thread, for Coarse Screw Thread

Sprup for Metric Thread, for Coarse Screw Thread M4-0.7x2.0D

4.04 (26)
Package Qty.
Ship pack of
5.97 SGD
In stock
Now we ship to...
...see all
Item Feature
Under Tap Hole Minimum Diameter (mm)
Nominal Length
Dimension L2 (mm)
Screw Designation Dimension
Freedom Minimum Outer Diameter (mm)
Freedom Maximum Outer Diameter (mm)
Under Tap Hole Maximum Diameter (mm)
Compatible Drill Diameter (mm)
Number of Free Coils
8 7/8
Enhance strength pulling screw out Uniformalization of stress distribution of screw thread.
Customer Reviews
5 star 14
4 star 3
3 star 7
2 star 0
1 star 2
Review Rating: 4.04
26 Customer Reviews
The reviews are automatic translation.
From Japan
On 2017-03-31 13:00:28
It is not normally use the problem. It would not hurt to buy.
This review is about item#5494806.
Screw reinforcement
From Japan
On 2016-12-28 15:23:17
In 10 × 10 it ordered 100 pieces, but, I was thankful Once us to one bag.
This review is about item#5494833.
Screw mountain modification of bike parts
From Japan
On 2016-09-28 18:44:33
You can also use without any problems Made in China and also solid difference making is
This review is about item#5494991.
For the bonnet mounting
From Japan
On 2016-06-09 17:12:42
Since the bolt holes in the hood had collapsed, I was allowed to buy here. Because was not long enough, but was used in the two with, I can use without discomfort.
This review is about item#05494946.
Repair at the time of the screw hole destruction
From Japan
On 2016-05-01 05:27:58
It is a good idea to practice to buy the larger amount because the trick is necessary for installation
This review is about item#40500494.
Screw holes reinforcement
From Japan
On 2016-04-30 20:50:58
Very good products have been previously used. On the other, requires a dedicated scan Prieure taps and fittings
This review is about item#40500494.
Processing of plastic parts of general industrial machinery
From Japan
On 2016-03-24 15:45:15
For Supuryu itself, we are satisfied with the quality, the price of both. Other person also has to fill out, but 10 pieces subdivision bag, there is no description of the standard. In this regard, we strongly demanded the improvement.
This review is about item#05494851.
Vehicle maintenance
From Japan
On 2016-02-26 16:47:04
no problem
This review is about item#05494937.
For previous reviews
From Japan
On 2016-02-12 10:29:33
Representation of the standard is not in the ○ packaging bag ↑ at the time of manufacturer shipment are listed in the box, or bag. ○ Supuryu is dally ↑ Will the fact that the outside diameter is large? The outer diameter of the pre-insertion (free outer diameter) is made larger than the tap hole. It becomes more difficult to pull it out from the base material by increasing. M3 largest free outer diameter of 4.11, M4 is 5.42. Used to change from ○ M8 to M6 ↑ is improper use. Supuryu can not be used for the purpose of reducing the bolt size. Since the maximum of tap pilot hole diameter of the M6 ​​is 6.42, too large under hole of the M8. Please refer to the size of the table of the manufacturer website for the pilot hole.
It is used to be asked to strength in plastics processing.
From Japan
On 2016-02-08 18:08:49
Even before the buy did to replenish because the stock is no longer buy, because there is a sudden production stock is in the manner not to cut, (because it is not purchased at the hardware store)
This review is about item#05494833.