The reviews are automatic translation.
Take control of the corner pipe of the garage
On 2017-05-27 23:57:01
It might have been a bit short because it was a heavy steel frame, but created a private room pasted with a control.
Pasteboard to steel frame
On 2017-04-14 19:41:08
I tried driving one piece with strength test to L40 × 4 t with an impact driver of 100V. I could hit it firmly without breaking. I pulled out in reverse and visually inspected the screw part etc, but there was no problem at all.
Ash step installation on steel staircase
On 2017-02-08 10:20:25
The bags broke, at least one of them protruded. Probably packing problem. The thing seems to be no problem.
When component is mounted on door frame
On 2017-01-22 20:48:08
I was able to mount the parts firmly without scratching holes with very fine screws.
Usage of panel fixing of signboard
On 2016-01-26 17:54:33
Although the dish top is good, the tip cut is bad compared to other iron plate screws.
Attaching the stay to the iron frame of the shutter
On 2015-11-03 10:22:18
I was able to use it properly and finished the work smoothly. The accuracy of + was also good, and it did not get caught and bitten into licks.
On 2015-10-05 14:23:49
Normal upper class !!
Fixation to iron plate
On 2015-08-31 08:23:44
If there is a little more packs still better.
Screw of the control
On 2014-05-22 17:22:50
It is cheap and convenient. I would like to purchase again.
Repair of truck bed
On 2014-03-18 14:38:54
I opened it and used it, but it closed smoothly. Because it was a box wrapping, not boxed, I wanted a box to store the remaining screws. 5mm Since the short size was high, I made it a long size.