The reviews are automatic translation.
Used for attaching a fall prevention metal fitting on a steel shelf
On 2017-10-13 17:28:27
Used for attaching a fall prevention metal fitting with an L type metal fitting on a steel shelf
Since there was a counterbore for countersunk screws in the L-shaped bracket, we used the drill screw of the countersunk head this time
It is sweet (weak) than the drill screw which the drill part of the screw tip used up to now
Although I felt, I could easily fix it on a steel shelf of about 0.5 mm.
It is good that it is inexpensive.
Take control of the corner pipe of the garage
On 2017-05-27 23:57:01
It might have been a bit short because it was a heavy steel frame, but created a private room pasted with a control.
Pasteboard to steel frame
On 2017-04-14 19:41:08
I tried driving one piece with strength test to L40 × 4 t with an impact driver of 100V. I could hit it firmly without breaking. I pulled out in reverse and visually inspected the screw part etc, but there was no problem at all.
Ash step installation on steel staircase
On 2017-02-08 10:20:25
The bags broke, at least one of them protruded. Probably packing problem. The thing seems to be no problem.
When component is mounted on door frame
On 2017-01-22 20:48:08
I was able to mount the parts firmly without scratching holes with very fine screws.
Usage of panel fixing of signboard
On 2016-01-26 17:54:33
Although the dish top is good, the tip cut is bad compared to other iron plate screws.
Attaching the stay to the iron frame of the shutter
On 2015-11-03 10:22:18
I was able to use it properly and finished the work smoothly. The accuracy of + was also good, and it did not get caught and bitten into licks.
On 2015-10-05 14:23:49
Normal upper class !!
Fixation to iron plate
On 2015-08-31 08:23:44
If there is a little more packs still better.
Screw of the control
On 2014-05-22 17:22:50
It is cheap and convenient. I would like to purchase again.